Log In

Log In

Need an Account? Start Here

 

Model: 054104-01502

Add to Cart for Quote

PCB L&T Fastener Force Washer, English, 1/4-in, 5 klbf (22.2 kN), 5-ft Integral Cable w/pigtails

  • Measurement Range: 5000 lb (22.24 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 0.641 in (16.3 mm)
  • Size - Height: 0.255 in (6.5 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)5000 lb22.24 kN[2] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[1] 
Hysteresis±5 % FS±5 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Environmental
Overload Limit7500 lb33.36 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Electrical
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Physical
Size - Height0.255 in6.5 mm 
Size - Diameter0.641 in16.3 mm 
Fastener Size0.25 in6.35 mm 
Through Hole Diameter0.256 in6.5 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads