fastener load washer, english, 1/4-in, 5 klbf (22.2 kn), 5-ft  integral cable w/pigtails

LOAD WASHER LOAD CELL - 1/4" FASTENERS

Model 054104-01502

  • IP

Fastener Load Washer, English, 1/4-in, 5 klbf (22.2 kN), 5-ft Integral Cable w/pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf
  • Measurement Range: 5000 lb (22.24 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: .674 in (17.12 mm)
  • Size - Height: 0.255 in (6.48 mm)

Specification Notes


[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions

English: SI:
Performance
Measurement Range (Full Scale Capacity) 5000 lb 22.24 kN [1]
Sensitivity (output at rated capacity) 1.50 mV/V 1.50 mV/V [1] [2]
Non-Linearity ±5 % FS ±5 % FS [2]
Hysteresis ±5 % FS ±5 % FS [2]
Non-Repeatability ±2 % FS ±2 % FS [2]
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 7500 lb 33.36 kN
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) N/A N/A
Temperature Effect on Output (Maximum) ±0.02 %Reading/°F ±0.036 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.02 %FS/°F ±0.036 %FS/°C [2]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [4]
Output Polarity (Compression) Positive Positive
Isolation Resistance ≥1G Ohm ≥1G Ohm
Physical
Size - Height 0.255 in 6.48 mm [5]
Size - Diameter .674 in 17.12 mm
Fastener Size 1/4 in NO EQUIV
Through Hole Diameter .257 in 6.53 mm
Sensing Element Strain Gage Strain Gage
Electrical Connector Pigtail Ends Pigtail Ends
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080922-01000 Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual 0
080962-01000 Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case 0
Supplied
7122R-007502 1
92160-032507 1
92160-032508 1