Model: 352M221

$1,612.00 USD
(Pricing valid in US only)


ICP® Accel., 10 mV/g, 500 g, 2nd order filter, 1 Hz to 10 kHz response, calibration from 5 Hz to upper 5% frequency, overmolded 40 foot hydrotested cable to 500 psi

Waterproof, pressure tested cable over-molded directly to the sensor

  • Sensitivity: (±15%) 10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Broadband Resolution: .001 g rms (.01 m/s² rms)
  • Frequency Range: (±5%) 1 to 6000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.22 oz (6.3 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)10 mV/g1.02 mV/(m/s²) 
Measurement Range±500 g pk±4905 m/s² pk 
Frequency Range (±5 %)1 to 6000 Hz1 to 6000 Hz 
Frequency Range (±10 %).5 to 10000 Hz.5 to 10000 Hz 
Electrical Filter Corner Frequency>15 kHz>15 kHz[2] 
Electrical Filter Roll-off12 dB/octa√e12 dB/octa√e[2] 
Resonant Frequency≥50 kHz≥50 kHz 
Broadband Resolution (1 to 10000 Hz).001 g rms.01 m/s² rms[2] 
Non-Linearity≤1 %≤1 %[1] 
Transverse Sensitivity≤5 %≤5 %[3] 
Environmental
Overload Limit (Shock)±7000 g pk±68670 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Electrical
Excitation Voltage18 to 30 VDC18 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage7 to 12 VDC7 to 12 VDC 
Discharge Time Constant0.4 to 2.5 sec0.4 to 2.5 sec 
Settling Time (within 10% of bias)<10 sec<10 sec 
Spectral Noise (1 Hz)230 µg/√Hz2256 (µm/sec2)/√Hz[2] 
Spectral Noise (10 Hz)38 µg/√Hz373 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)19 µg/√Hz186 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)10 µg/√Hz98 (µm/sec2)/√Hz[2] 
Physical
Size - Height0.71 in18 mm 
Weight (without cable)0.22 oz6.3 gm[2] 
Sensing ElementCeramicCeramic 
Size - Hex0.44 in11.1 mm 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Electrical ConnectorSealed Integral CableSealed Integral Cable[4] 
Electrical Connection PositionSideSide 
Cable TerminationPigtail EndsPigtail Ends 
Cable Length40 ft12.2 m 
Cable TypeSB-42275 Twisted Shielded PairSB-42275 Twisted Shielded Pair 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically <= 3%.
[4] Sensor and Cable hydrotested without connector to 500 psi [3.3 MPa].
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081B05Mounting Stud (10-32 to 10-32)(1)
ACS-1305Hz to highest spec 10k Hz(1)
ATS-6Hydro test (sensor/cable pressurized in water environment)(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads