Model: 350D02

$795.00 USD
(Pricing valid in US only)


Shock, ICP® accel., 0.1 mV/g, 50 kg, 10-ft integral cable, 1/4-28 integral stud

  • Sensitivity: (±30%) 0.1 mV/g (0.01 mV/(m/s²))
  • Measurement Range: ±50000 g pk (±490000 m/s² pk)
  • Frequency Range: (±1dB) 4 to 10000 Hz
  • Electrical Filter Corner Frequency: (-3dB) 17 kHz
  • Mechanical Filter Resonant Frequency: 35 kHz
  • Weight: 0.16 oz (4.5 gm)

Add this product to my product comparison
Compare selected models ()

Additional Configurations:
Sensitivity (±30 %)0.1 mV/g0.01 mV/(m/s²) 
Measurement Range±50000 g pk±490000 m/s² pk 
Frequency Range (±1 dB)4 to 10000 Hz4 to 10000 Hz 
Frequency Range (-3 dB)2 to 25000 Hz2 to 25000 Hz[2] 
Electrical Filter Corner Frequency (-3 dB)17 kHz17 kHz[1][3] 
Mechanical Filter Resonant Frequency35 kHz35 kHz[1][4] 
Resonant Frequency≥100 kHz≥100 kHz 
Broadband Resolution (1 to 10000 Hz)0.5 g rms4.9 m/s² rms[1] 
Non-Linearity (per 10,000 g (98,100 m/s²))2.5 %2.5 % 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)±150000 g pk±1471500 m/s² pk 
Temperature Range (Operating)-10 to +150 °F-23 to +66 °C 
Temperature Range (Storage)-40 to +200 °F-40 to +93 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[1][5] 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤200 Ohm≤200 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Discharge Time Constant0.10 sec0.10 sec[1] 
Settling Time (within 10% of bias)<1 sec<1 sec 
Electrical Isolation (Case)>1000000 Ohm>1000000 Ohm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
Size - Hex0.375 in9.5 mm 
Size - Height0.87 in22.1 mm 
Weight (without cable)0.16 oz4.5 gm[1] 
Electrical ConnectorIntegral CableIntegral Cable 
Cable Length10 ft3.05 m 
Cable Type031 Twisted Pair031 Twisted Pair 
Mounting Thread1/4-28 Male1/4-28 Male 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Typical.
[2] Typical corner frequency for coupled electrical and mechanical filters.
[3] Electrical filter is a second order filter.
[4] Amplitude at resonance is +9 dB.
[5] Test conducted on shaker at 100Hz.
[6] See PCB Declaration of Conformance PS135 for details.
ACS-14High G shock accelerometer calibration using Hopkinson bar.(1)
ACS-22NIST Traceable frequency response (100Hz to ±1 dB point)(1)
Optional Versions:
(M) Metric Mount
    Mounting ThreadM6 x 0.75 Male
Product Documents
Additional Downloads