Products

low-cost, general purpose, industrial ceramic shear icp® accel, 10 mv/g, 0.5 to 10k hz, top exit, 10 feet integral cable, intrinsically safe, single point iso 17025 accredited calibration

ACCELEROMETER

Model EX603C10

Add to Quote
  • CE
  • EX
  • IP

Low-cost, general purpose, industrial ceramic shear ICP® accel, 10 mV/g, 0.5 to 10k Hz, top exit, 10 feet integral cable, intrinsically safe, single point ISO 17025 accredited calibration

    Additional configurations:

    Specification Notes

    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Zero-based, least-squares, straight line method.
    [3] The high frequency tolerance is accurate within ±10% of the specified frequency.
    [4] Typical.
    [5] Twisted shielded pair.
    [6] 1/4-28 has no equivalent in S.I. units.
    [7] See PCB Declaration of Conformance PS023 or PS060 for details.
    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Zero-based, least-squares, straight line method.
    [3] The high frequency tolerance is accurate within ±10% of the specified frequency.
    [4] Typical.
    [5] Twisted shielded pair.
    [6] 1/4-28 has no equivalent in S.I. units.
    [7] See PCB Declaration of Conformance PS023 or PS060 for details.

    English: SI:
    Performance
    Sensitivity (±20 %) 10 mV/g 1.02 mV/(m/s²) [1] [1]
    Measurement Range ±500 g ±4905 m/s²
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [3] [3]
    Resonant Frequency 1500 kcpm 25 kHz [4] [4]
    Broadband Resolution (1) 2000 µg 19620 µm/sec2 [4] [4]
    Non-Linearity ±1 % ±1 % [2] [2]
    Transverse Sensitivity ≤7 % ≤7 %
    Sensitivity (±20 %) 10 mV/g 1.02 mV/(m/s²) [1] [1]
    Measurement Range ±500 g ±4905 m/s²
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [3] [3]
    Resonant Frequency 1500 kcpm 25 kHz [4] [4]
    Broadband Resolution (1) 2000 µg 19620 µm/sec2 [4] [4]
    Non-Linearity ±1 % ±1 % [2] [2]
    Transverse Sensitivity ≤7 % ≤7 %
    Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [4] [4]
    Enclosure Rating IP68 IP68
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [4] [4]
    Enclosure Rating IP68 IP68
    Electrical
    Settling Time (within 1% of bias) ≤3.0 sec ≤3.0 sec
    Discharge Time Constant ≥0.4 sec ≥0.4 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance <150 Ohm <150 Ohm
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 85 µg/√Hz 834 (µm/sec2)/√Hz [4] [4]
    Spectral Noise (100 Hz) 20 µg/√Hz 196 (µm/sec2)/√Hz [4] [4]
    Spectral Noise (1 kHz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [4] [4]
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
    Settling Time (within 1% of bias) ≤3.0 sec ≤3.0 sec
    Discharge Time Constant ≥0.4 sec ≥0.4 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance <150 Ohm <150 Ohm
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 85 µg/√Hz 834 (µm/sec2)/√Hz [4] [4]
    Spectral Noise (100 Hz) 20 µg/√Hz 196 (µm/sec2)/√Hz [4] [4]
    Spectral Noise (1 kHz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [4] [4]
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
    Physical
    Size - Hex 11/16 in 18 mm
    Size - Height 4.7 in 119 mm
    Weight (without cable) 1.8 oz 51 gm
    Mounting Thread 1/4-28 Female 1/4-28 Female [6] [6]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Mounting Torque (hex nut) 2 to 3 ft-lb 2.7 to 4.1 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Welded Hermetic Welded Hermetic
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connection Position Top Top
    Cable Length 10 ft 3.0 m
    Cable Type Polyurethane Polyurethane [5] [5]
    Size - Hex 11/16 in 18 mm
    Size - Height 4.7 in 119 mm
    Weight (without cable) 1.8 oz 51 gm
    Mounting Thread 1/4-28 Female 1/4-28 Female [6] [6]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Mounting Torque (hex nut) 2 to 3 ft-lb 2.7 to 4.1 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Welded Hermetic Welded Hermetic
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connection Position Top Top
    Cable Length 10 ft 3.0 m
    Cable Type Polyurethane Polyurethane [5] [5]

    * All specifications are at room temperature unless otherwise specified.

    TempChart

    Accessories
    Supplied
    081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
    ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1
    M081A61 Mounting stud, 1/4-28 to M6x1 x 9.65 mm long, BeCu w/shoulder 1
    Supplied
    081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
    ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1
    M081A61 Mounting stud, 1/4-28 to M6x1 x 9.65 mm long, BeCu w/shoulder 1

    Optional Versions

    (EX) Hazardous Area Approval- contact factory for specific approvals

    English SI
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC 1T4, -40 = Ta = 121°C, II 3 G
    Hazardous Area Approval EEx nL IIC 1T4, -40 = Ta = 121°C, II 3 G

    (TO) Temperature Output

    English SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connections Temperature Output
    Electrical Connections Ground
    Electrical Connections Acceleration Output
    Electrical Connections Ground
    Electrical Connector Molded Integral Cable