single axis mems dc accelerometer, 27 mv/g, 50 g, 10 ft integral cable

DC Response Accelerometer

Model 3711F1250G

  • IP

Single Axis MEMS DC accelerometer, 27 mV/g, 50 g, 10 ft integral cable

  • Sensitivity: (±3%)27 mV/g (2.8 mV/(m/s²))
  • Measurement Range: ±50 g pk (±490 m/s² pk)
  • Broadband Resolution: 1.5 mg rms (0.015 m/s² rms)
  • Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%)0 to 1500 Hz
  • Electrical Connector: Integral Cable (Integral Cable)

Additional configurations:

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 10 grms.
[2] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] FSO= Full Scale Output over the Measurement Range
[2] Typical.
[6] Offset tolerance is based on 10 ft of 010 test cable.

English: SI:
Performance
Sensitivity (±3 %) 27 mV/g 2.8 mV/(m/s²) [3]
Measurement Range ±50 g pk ±490 m/s² pk
Frequency Range (±5 %) 0 to 1500 Hz 0 to 1500 Hz
Frequency Range (±10 %) 0 to 2000 Hz 0 to 2000 Hz
Resonant Frequency 6.5 kHz 6.5 kHz [2]
Phase Response (100 Hz) ≤10 ° ≤10 °
Non-Linearity (Typical) 3 % 3 % [1]
Non-Linearity (Max) 1 % 1 % [1]
Broadband Resolution (0.5) 1.5 mg rms 0.015 m/s² rms [2]
Transverse Sensitivity (Typical) 1 % 1 %
Transverse Sensitivity (Max) 3 % 3 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54.0 to +121 °C
Temperature Range (Storage) -65 to +250 °F -54.0 to +121 °C
Temperature Coefficient of Sensitivity ±2.5 % ±2.5 % [4]
Temperature Coefficient of Sensitivity ±1 % ±1 % [2] [4]
Zero g Offset Temperature Coefficient ±1 % FSO ±1 % FSO [2] [4] [5]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Magnetic Sensitivity 40 µg/gauss 3.9 (m/s²)/Tesla [2]
Electrical
Excitation Voltage 5 to 32 VDC 5 to 32 VDC
Current Consumption ≤5 mA ≤5 mA
Output Impedance ≤120 Ohm ≤120 Ohm
Offset Voltage +/-20 mVDC +/-20 mVDC [6]
Spectral Noise (1 Hz) 150 µg/√Hz 1,472 (µm/s²)/√Hz [2]
Spectral Noise (10 Hz) 150 µg/√Hz 1,472 (µm/s²)/√Hz [2]
Spectral Noise (100 Hz) 150 µg/√Hz 1,472 (µm/s²)/√Hz [2]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.45 in 11.4 mm
Size - Length 0.85 in 21.6 mm
Size - Width 0.85 in 21.6 mm
Weight (with cable) 2.29 oz 65.0 gm
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination Pigtail Ends Pigtail Ends
Cable Type 010 4-cond Shielded 010 4-cond Shielded
Cable Length 10 ft 3.05 m
Mounting Through Hole Through Hole

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-172 1
080A152 Easy Mount Clip for Series 3701 and 3711 DC Response Accelerometers 1
081A113 4-40 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground) 2
M081A113 M2.5x0.45 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground) 2

Build Out Your Measurement Chain