Model : 393A03 | Accelerometer, ICP®, Seismic

Click for lead times
Lead Time for 1-10 is 12 Wks
Lead Time for 0-0 is 0 Wks
$ 675.00 USD
(Pricing valid in US only!)

Seismic, ceramic shear ICP® accel., 1 V/g, 0.5 to 2k Hz, 2-pin top conn.

  • Sensitivity: (±5%)1000 mV/g (102 mV/(m/s²))
  • Broadband Resolution: 0.00001 g rms (0.0001 m/s² rms)
  • Measurement Range: ±5 g pk (±49 m/s² pk)
  • Frequency Range: (±5%)0.5 to 2000 Hz
  • Electrical Connector: 2-Pin MIL-C-5015
  • Weight: 7.4 oz (210 gm)

RELATED PRODUCTS



024R10

Industrial, twisted/shielded pair, polyurethane cable, 10-ft, military 2-pin conn. to BNC plug



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±5 %) 1000 mV/g 102 mV/(m/s²)
Measurement Range ±5 g pk ±49 m/s² pk
Frequency Range (±5 %) 0.5 to 2000 Hz 0.5 to 2000 Hz
Frequency Range (±10 %) 0.3 to 4000 Hz 0.3 to 4000 Hz
Frequency Range (±3 dB) 0.2 to 6000 Hz 0.2 to 6000 Hz
Resonant Frequency ≥10000 Hz ≥10000 Hz
Broadband Resolution (1) 0.00001 g rms 0.0001 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity ≤0.0005 g/µε ≤0.005 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <250 Ohm <250 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 1 to 3 sec 1 to 3 sec
Settling Time <15 sec <15 sec
Spectral Noise (1 Hz) 2 µg/√Hz 20 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 0.5 µg/√Hz 5 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 0.2 µg/√Hz 2 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.1 µg/√Hz 1 (µm/sec2)/√Hz [2]
Electrical Isolation (Case) ≥100000000 Ohm ≥100000000 Ohm
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Size - Hex 1 3/16 in 30.2 mm
Size - Height 2 3/16 in 55.6 mm
Weight 7.4 oz 210 gm [2]
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
Mounting Thread 1/4-28 Female 1/4-28 Female
Mounting Torque 2 to 5 ft-lb 3 to 7 Nm
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
081B20 Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder 1
085A31 Protective insulated boot 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1
ACS-4 Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz, (requires ACS-1 and minimum sensitivity of 20 mV/g) 1
M081B20 Metric mounting stud, 1/4-28 to M6 x 0.75, BeCu w/shoulder 1


Optional Versions


( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
English SI
Output Bias Voltage 8.5 to 12.5