Model : 352A73 | ICP® Accelerometer

Click for lead times
Lead Time for 1-10 is 6 Wks
Lead Time for 11-20 is 7 Wks
$ 685.00 USD
(Pricing valid in US only!)

Platinum Stock Products;Miniature, lightweight (0.3 gm), ceramic shear ICP® accel., 5 mV/g, 2 to 10k Hz, titanium housing, 10-ft flexible, integral cable

  • Sensitivity: (±20%)5 mV/g (0.51 mV/(m/s²))
  • Measurement Range: ±1000 g pk (±9810 m/s² pk)
  • Broadband Resolution: 0.002 g rms (0.02 m/s² rms)
  • Frequency Range: (±5%)2.0 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.01 oz (0.3 gm)

RELATED PRODUCTS



039a26

One-piece removal tool (for Model 352C23)



Add to Cart for Quote
Add To Cart
070A02

Scope input adaptor (10-32 jack to BNC plug)



Add to Cart for Quote
Add To Cart
485B39

2-channel, USB-powered, ICP® sensor signal conditioner with USB digital output (24-bit A/D)



Add to Cart for Quote
Add To Cart
080A194

Triaxial mounting adaptor, anodized aluminum (for teardrop accelerometers)



Add to Cart for Quote
Add To Quote
English: SI:
Performance
Sensitivity (±20 %) 5 mV/g 0.51 mV/(m/s²)
Measurement Range ±1000 g pk ±9810 m/s² pk
Frequency Range (±5 %) 2.0 to 10000 Hz 2.0 to 10000 Hz
Frequency Range (±10 %) 1.5 to 25000 Hz 1.5 to 25000 Hz
Frequency Range (±3 dB) 0.7 to 40000 Hz 0.7 to 40000 Hz
Resonant Frequency ≥70 kHz ≥70 kHz
Broadband Resolution (1) 0.002 g rms 0.02 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±10000 g pk ±98000 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.2 to 1.0 sec 0.2 to 1.0 sec
Settling Time (within 10% of bias) <3 sec <3 sec
Spectral Noise (1 Hz) 875 µg/√Hz 8580 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 150 µg/√Hz 1470 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 45 µg/√Hz 440 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 20 µg/√Hz 196 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 10 µg/√Hz 98 (µm/sec2)/√Hz [2]
Physical
Weight (without cable) 0.01 oz 0.3 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height .11 in 2.8 mm
Size - Length 0.34 in 8.6 mm
Size - Width 0.16 in 4.1 mm
Electrical Connector Solder pins with attached cable Solder pins with attached cable
Electrical Connection Position Side Side
Cable Termination 10-32 Coaxial Plug 10-32 Coaxial Plug
Cable Length 10 ft 3.05 m [3]
Mounting Adhesive Adhesive
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Cable is made up of 1 ft. of 089 cable (32 AWG twisted pair) spliced to 9 ft. of 018 cable (coaxial).
[4] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
039A26 One-piece removal tool (for Model 352C23) 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1