Model : 357M168 | Charge Output Accelerometer

Call for lead time
$ 4,074.00 USD
(Pricing valid in US only!)

Extreme Temperature, Miniature Accelerometer with Weld Tabs

  • Sensitivity: (±10%)1.15 pC/g (.117 pC/(m/s²))
  • Measurement Range: ±1000 g pk (±9800 m/s² pk)
  • Frequency Range: (±10%)10 kHz
  • Cable Termination: 10-32 Coaxial Jack
  • Weight: .35 oz (10 gm)
Additional Configurations:

RELATED PRODUCTS



422E35

In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors



Add to Cart for Quote
Add To Cart
422E36

In-line charge converter, 10 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors



Add to Cart for Quote
Add To Cart
422E65/A

In-line charge converter, 1 mV/pC, +/-5V output, -5% frequency 5 Hz, 10-32 jack conn., Rad Hard



Add to Cart for Quote
Add To Cart
422E66/A

In-line charge converter, 10 mV/pC, +/-5V output, -5% frequency 5 Hz, 10-32 jack conn., Rad Hard



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±10 %) 1.15 pC/g .117 pC/(m/s²) [1]
Measurement Range ±1000 g pk ±9800 m/s² pk [1]
Frequency Range (±10 %) 10 kHz 10 kHz
Resonant Frequency 45 kHz 45 kHz [2]
Non-Linearity (per full scale range) 1 % 1 %
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±2000 g pk ±19600 m/s² pk
Temperature Range (Operating) -67 to 1200 °F -55 to 649 °C [3]
Temperature Range (Survivable Limit) -67 to 1400 °F -55 to 760 °C
Temperature Range (Cable Termination) -67 to 900 °F -55 to 482 °C
Temperature Response See Graph See Graph [2]
Radiation Exposure Limit (Integrated Neutron Flux) 1E10 N/cm² 1E10 N/cm²
Radiation Exposure Limit (Integrated Gamma Flux) 1E8 rad 1E8 rad
Electrical
Capacitance 1000 pF 1000 pF [2] [4]
Insulation Resistance (@ 1200°F[649°C]) ≥30 kohm ≥30 kohm [3]
Insulation Resistance (@ 70° F [21°C]) ≥1 GOhm ≥1 GOhm
Output Polarity Positive Positive
Electrical Isolation Signal isolated from case Signal isolated from case
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Shear Shear
Housing Material Nickel Alloy Nickel Alloy
Sealing (Sensor Housing) Hermetic Hermetic
Sealing (Connector) Welded Hermetic Welded Hermetic
Size - Height .40 in 10.2 mm
Size - Length .55 in 14.0 mm
Size - Width .50 in 12.7 mm
Weight (without cable) .35 oz 10 gm [2]
Electrical Connector Integral Hardline Cable Integral Hardline Cable
Cable Length 10 ft 3.05 m [3]
Cable Type MI Hardline Cable MI Hardline Cable
Cable Termination 10-32 Coaxial Jack 10-32 Coaxial Jack
Mounting Thread 5-40 Female 5-40 Female
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] For cable lengths less than 1.5 Ft [,46m] insulation resistance is only tested to 900F [482C].
[2] Typical.
[4] Additional cable length will add approx. 100pF/ft.
[3] For cable lengths less than 1.5 Ft [,46m] insulation resistance is only tested to 900F [482C].
[2] Typical.
[3] For cable lengths less than 1.5 Ft [,46m] insulation resistance is only tested to 900F [482C].
[5] See PCB Declaration of Conformance PS081 for details.


Accessories


Supplied
64287-01 1
ACS-44 Extended Frequency Response Calibration to +10% point (requires ACS-1) 1