Model : 202M44 | Force Sensor, ICP®

Click for lead times
$ 1,690.00 USD
(Pricing valid in US only!)

ICP® quartz force ring, 100 lbs., 50 mV/lb, 20 ft integral Model 042 cable terminated in pigtails

Waterproof, pressure tested cables over-molded directly to the sensor.

  • Measurement Range: 100 lb (0.4448 kN)
  • Sensitivity: (±15%)50 mV/lb (11240 mV/kN)
  • Low Frequency Response: (-5%)0.005 Hz
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
English: SI:
Performance
Sensitivity (±15 %) 50 mV/lb 11240 mV/kN
Measurement Range (Compression) 100 lb 0.4448 kN
Maximum Static Force (Compression) 600 lb 2.669 kN
Broadband Resolution (1) 0.002 lb-rms 0.0089 N-rms [2]
Low Frequency Response (-5 %) 0.005 Hz 0.005 Hz [3]
Upper Frequency Limit 60000 Hz 60000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp) ≥100 sec ≥100 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Preload 300 lb 1.334 kN
Stiffness 16 lb/µin 2.8 kN/µm [2]
Size - Diameter 0.870 in 22.1 mm
Size - Height 0.390 in 9.91 mm
Size - Bolt Diameter 0.375 in 10 mm
Size - ID (Hole Diameter) 0.413 in 10.49 mm
Size - OD (Sensor) 0.870 in 22.10 mm
Size - Sensing Surface 0.665 in 16.89 mm
Weight 0.77 oz 22 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector Molded Integral Cable Molded Integral Cable [5]
Electrical Connection Position Side Side
Cable Type 042 2-cond Shielded 042 2-cond Shielded
Cable Length 20 6.1
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] Molded integral cable terminating in pigtail.


Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
082B02 Anti-friction washer (for Models 202B, 212B, 260A01, 260A11, & 260A31) 1