Log In

Log In

Need an Account? Start Here

 

Model: TO640B62

Add to Cart for Quote

4-20 MA SENSOR

  • Measurement Range: 0.0 to 2.0 in/sec pk (0.0 to 50.8 mm/s pk)
  • Output: 4-20 mA
  • Frequency Range: (±10%) 180 to 60000 cpm (3 to 1 kHz)

Add this product to my product comparison
Compare selected models ()

Additional Configurations:
 English:SI: 
Performance
Measurement Range (Vibration)0.0 to 2.0 in/sec pk0.0 to 50.8 mm/s pk[3] 
Measurement Range (Temperature)-40 to 257 °F-40 to 125 °C[5] 
Output4-20 mA4-20 mA 
Frequency Range (±10 %)180 to 60000 cpm3 to 1 kHz[1][2] 
Broadband Resolution0.01 in/sec pk0.26 mm/s pk[4] 
Non-Linearity1 %1 % 
Environmental
Temperature Range-40 to 185 °F-40 to 85 °C[5] 
Electrical
Excitation Voltage12 to 30 VDC12 to 30 VDC 
Settling Time<15 sec<15 sec 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex1.00 in25.4 mm 
Size - Height4.2 in107 mm 
Weight (without cable)4.7 oz131 gm 
Mounting Thread1/4-28 UNF1/4-28 UNF 
Mounting Torque3 to 5 ft-lb4 to 7 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorIntegral Armored CableIntegral Armored Cable 
Electrical Connection PositionTopTop 
Cable TerminationPigtail EndsPigtail Ends 
Electrical Connections (Red)Vibration, 4-20 mA Pos.Vibration, 4-20 mA Pos. 
Electrical Connections (Black)Vibration, 4-20 mA Neg.Vibration, 4-20 mA Neg. 
Electrical Connections (White)Temperature, 4-20 mA Pos.Temperature, 4-20 mA Pos. 
Electrical Connections (Green)Temperature, 4-20 mA Neg.Temperature, 4-20 mA Neg. 
Cable Length10 ft3 m 
Cable TypePolyurethanePolyurethane 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] 1Hz = 60 cpm (cycles per minute).
[2] Current will fluctuate at frequencies below 5 Hz.
[3] Conversion Factor 1 in/sec = 0.0254 m/sec.
[4] Typical value.
[5] Vibration 4-20mA output accuracy is limited to 185°F (85°C)
[6] See PCB Declaration of Conformance PS039 or PS053 for details.
Accessories:
Supplied
081A40Mounting Stud(1)
ICS-4NIST-traceable single-axis amplitude response calibration from 0 cpm (0 Hz) to upper 10% frequency for 4 - 20 mA output vibration sensor(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
 ENGLISHSI
    Hazardous Area ApprovalEEx ia IIC T4, -40°C≤Ta≤80°C, II 1 G
    Hazardous Area ApprovalEEx nL IIC T4, -40°C≤Ta≤80°C, II 3 G
    Hazardous Area ApprovalDIV I, CL I, II, III, GRPS A-G, Exia, AExia, IIC T4
    Hazardous Area ApprovalDIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
(M) Metric Mount
Accessories:
    M081A61Mounting Stud(1)
Product Documents
Additional Downloads