Log In

Log In

Need an Account? Start Here


Model: EX611A00

$5,045.00 USD
(Pricing valid in US only)


High temperature,intrinsically safe, charge mode accelerometer with UHT-12 tm shear sensing crystal, 10 pC/g sensitivity, 1200 degree F, 10 ft integral hard-line cable.

When using Model EX682A40 or 421A31 differential charge amplifier, also use 045M21B cable.

  • Sensitivity: (±5%) 10 pC/g (1.02 pC/(m/s²))
  • Measurement Range: ±200 g pk (±1962 m/s² pk)
  • Frequency Range: (±5%) 2800 Hz
  • Weight: 6.3 oz (180 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±5 %)10 pC/g1.02 pC/(m/s²) 
Measurement Range±200 g pk±1962 m/s² pk 
Frequency Range (±5 %)2800 Hz2800 Hz[2] 
Frequency Range (+10 %)3700 Hz3700 Hz[2] 
Resonant Frequency≥17 kHz≥17 kHz 
Non-Linearity≤1 %≤1 %[3] 
Transverse Sensitivity≤5 %≤5 %[1] 
Overload Limit (Shock)±5000 g pk±49050 m/s² pk 
Temperature Range-65 to +1200 °F-54 to +650 °C[5] 
Temperature Range-165 to +1300 °F-109 to +704 °C[6] 
Temperature ResponseSee Graph See Graph [4] 
Base Strain Sensitivity0.033 g/µε0.32 (m/s²)/µε[4] 
Radiation Exposure Limit (Integrated Neutron Flux)1 E10 N/cm²1 E10 N/cm² 
Radiation Exposure Limit (Integrated Gamma Flux)1 E8 rad1 E8 rad 
Hazardous Area ApprovalEx ia IIC T6 . . . T 710°C GaEx ia IIC T6 . . . T 710°C Ga 
Hazardous Area ApprovalIECEx Ex ia IIC T6 . . . T 710°C GaIECEx Ex ia IIC T6 . . . T 710°C Ga 
Capacitance (Pin to Pin)250 pF250 pF[4] 
Capacitance (Pin to Case)110 pF110 pF[4] 
Capacitance (Unbalance Between Pins)≤2 pF≤2 pF 
Insulation Resistance (Pin to Case 70° F)>1000000000 Ohm>1000000000 Ohm[4] 
Insulation Resistance (Pin to Pin 70° F)>1000000000 Ohm>1000000000 Ohm 
Output PolarityDifferentialDifferential 
Sensing ElementUHT-12™UHT-12™ 
Sensing GeometryShearShear 
Housing MaterialInconelInconel 
Size - Height.787 in20 mm 
Size - Length1.465 in37 mm 
Size - Width1.456 in37 mm 
Weight (without cable)6.3 oz180 gm[4] 
Electrical Connector7/16-27 2-Pin7/16-27 2-Pin 
Electrical Connection PositionSideSide 
Cable Length10 ft3.05 m 
Cable TypeMI Hardline CableMI Hardline Cable 
MountingThrough Holes (4)Through Holes (4) 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Transverse sensitivity is typically <= 3%.
[2] Low frequency response is determined by external signal conditioning electronics.
[3] Zero-based, least-squares, straight line method.
[4] Typical.
[5] Continuous
[6] Extreme
[7] See PCB Declaration of Conformance PS122 for details.
100-11121-90M6x1 x 30mm Long(4)
ACS-1NIST traceable frequency response (10 Hz to upper 5% point).(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads