Log In

Log In

Need an Account? Start Here

 

Model: 699A06

$9,300.00 USD
(Pricing valid in US only)

Datasheet

Portable Vibration Calibrator - Includes on-board ICP® & Voltage input, adjustable frequency range (5 Hz-10 kHz) and amplitude. LCD displays English or metric units.


  • Frequency Range: 7 to 10000 Hz (420 to 600000 cpm)
  • Maximum Load: 800 gm
  • Maximum Amplitude: 20 g pk (196 m/s^2 pk)
  • Maximum Amplitude: 15 in/sec pk (380 mm/s pk)
  • Maximum Amplitude: 50 mils pk-pk (1.27 mm pk-pk)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Maximum Load800 gm800 gm[1] 
Frequency Range (operating, 100 gram payload)7 to 10000 Hz420 to 600000 cpm 
Accuracy (Acceleration (30 Hz to 2 kHz))±3 %±3 % 
Accuracy (Acceleration (7 Hz to 10 kHz))±1 dB±1 dB 
Accuracy (Velocity (10 Hz to 1000 Hz))±3 %±3 % 
Accuracy (Displacement (30 Hz to 150 Hz))±3 %±3 % 
Amplitude Linearity (100 gram payload, 100 Hz)1% 1% [2][3] 
Distortion (100 gram payload, 30 Hz to 2 kHz)<5 %<5 %[4] 
Maximum Amplitude (Acc 100 Hz no payload)20 g pk196 m/s^2 pk 
Maximum Amplitude (Vel 100 Hz no payload)15 in/sec pk380 mm/s pk 
Maximum Amplitude (Displ 100 Hz no payload)50 mils pk-pk1.27 mm pk-pk 
Control Interface
External Source In (Max)1V AC RMS1V AC RMS 
Monitor Reference Out10 mV/g (nominal), Buffered internal reference output10 mV/g (nominal), Buffered internal reference output 
Display Units (Acceleration)g pk & RMSm/s² pk & RMS 
Display Units (Velocity)in/sec pk & RMSmm/sec pk & RMS 
Display Units (Displacement)mils pk-pkum pk-pk 
Display Units (Frequency)HzCPM 
Environmental
Temperature Range (Operating)32 to 122 °F0 to 50 °C 
Electrical
Power Required (Standard)12 VDC, 4 amp hours12 VDC, 4 amp hours 
Power Required (Alternate)110-240 V, 50-60 Hz110-240 V, 50-60 Hz 
Battery Life (100 gram load)18 hours18 hours[5] 
Battery Life (150 gram load)1 hour1 hour[5] 
Physical
Size - Depth10 in28 cm 
Size - Height8.5 in22 cm 
Size - Width12 in30.5 cm 
Weight (with batteries)18 lb8.2 kg 
Mounting Thread1/4-28 FemaleNo Metric Equivalent 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Operating range reduced at higher payloads. Reference manual for full details.
[2] 100 gram payload, 100 Hz
[3] Up to 10g pk
[4] Up to 5g pk
[5] As shipped from factory in new condition
Accessories:
Optional
600A30Calibration route semi-automation & pass/fail notification. Includes USB drive.(1)
600A325 Hz (300 CPM) Low Frequency Operation, Frequency Range (operating, 100 gram payload) 5Hz-10Hz (300-600,000 CPM), Acceleration Accuracy +/- 1dB(1)
Supplied
080A118Mounting pad 1.0" diameter 1/4-28 tapped hole (for stud mounting accelerometers)(1)
081A08Mounting Stud (10-32 to 1/4-28)(1)
081B20Mounting Stud, with shoulder (1/4-28 to 1/4-28)(1)
600A25Power Supply and Plug Adaptors(1)
600A34Mounting Wrench(1)
ICS-41NIST traceable Certificate of Calibration, Metric & English Units(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads