Log In

Log In

Need an Account? Start Here

 

Model: 66332APZ1

$117.50 USD
(Pricing valid in US only)

Datasheet

Low cost embeddable accelerometer, 2-wire ICP®, 1000 mV/g, TO8 housing, positive output, header pins

  • Sensitivity: (±20%) 1000 mV/g (102 mV/(m/s²))
  • Frequency Range: (±3dB) 0.25 to 5k Hz (0.25 to 5k Hz)
  • Sensing Element: Ceramic
  • Measurement Range: 5 g (50 m/s²)
  • Weight: 0.88 oz (25 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)1000 mV/g102 mV/(m/s²)[1][2] 
Measurement Range5 g50 m/s² 
Frequency Range (±3 dB)0.25 to 5k Hz0.25 to 5k Hz[3][6] 
Resonant Frequency>16 kHz>16 kHz[3] 
Broadband Resolution38 µg rms373 µm/sec2 rms[5] 
Non-Linearity≤1 %≤1 %[4] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Acceleration Sensitivity (±20 %)1000 mV/g102 mV/(m/s²)[2] 
Overload Limit (Shock)5000 g pk49k m/s² pk 
Temperature Range (Operating)-65 to +185 °F-54 to +85 °C 
Temperature ResponseSee Graph See Graph [5] 
Electrical
Settling Time (within 1% of bias)≤30 sec≤30 sec 
Discharge Time Constant≥0.65 sec≥0.65 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<550 Ohm<550 Ohm 
Output Bias Voltage (±10 %)8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)1.9 µg/√Hz18.6 (µm/sec2)/√Hz[5] 
Spectral Noise (100 Hz)0.6 µg/√Hz5.9 (µm/sec2)/√Hz[5] 
Spectral Noise (1 kHz)0.4 µg/√Hz3.9 (µm/sec2)/√Hz[5] 
Physical
Size - Lip Diameter0.64 in16.3 mm 
Size - Height0.57 in14.5 mm 
Weight0.88 oz25 gm 
MountingAdhesive/SolderAdhesive/Solder 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorHeader PinsHeader Pins 
Electrical Connection PositionBottomBottom 
Electrical Connections (Pin 1)Signal / PowerSignal / Power 
Electrical Connections (Pin 2)GroundGround 
Electrical Connections (Pin 3)No ConnectionNo Connection 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Positive output along Z-axis (in upward direction when pin mounted).
[3] Performance depends on mounting
[4] Zero-based, least-squares, straight line method.
[5] Typical.
[6] The high frequency tolerance is accurate within ±10% of the specified frequency.
[7] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(HT) High temperature, extends normal operation temperatures
 ENGLISHSI
    Temperature Range (Operating)-65 to 250 -54 to 121
Product Documents
Additional Downloads