Log In

Log In

Need an Account? Start Here

 

Model: 645B02

Add to Cart for Quote
Datasheet

Industrial vibration sensor, 4 to 20 mA output, 0 to 5 g's RMS, 3 to 10k Hz, top exit, 2-pin conn.

  • Measurement Range: 0.0 to 5 g rms (0.0 to 49 m/s² rms)
  • Output: 4-20 mA
  • Frequency Range: (±3dB) 180 to 600000 cpm (3 to 10 kHz)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range0.0 to 5 g rms0.0 to 49 m/s² rms[3] 
Output4-20 mA4-20 mA 
Frequency Range (±3 dB)180 to 600000 cpm3 to 10 kHz[1][2] 
Broadband Resolution0.025 g rms0.24 m/s² rms[4] 
Non-Linearity±1 %±1 % 
Environmental
Temperature Range-40 to 185 °F-40 to 85 °C 
Electrical
Excitation Voltage12 to 30 VDC12 to 30 VDC 
Load Resistance50(Vs-12) Ohm50(Vs-12) Ohm 
Settling Time (within 2% of value)<15 sec<15 sec 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex1.0 in25.4 mm 
Size - Height2.6 in66 mm 
Weight4.7 oz131 gm 
Mounting Thread1/4-28 UNFNo Metric Equivalent 
Mounting Torque3 to 5 ft-lb4 to 7 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
Electrical Connection PositionTopTop 
Electrical Connections (Pin A)4-20 mA Pos (+)4-20 mA Pos (+) 
Electrical Connections (Pin B)4-20 mA Neg (-)4-20 mA Neg (-) 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] 1Hz = 60 cpm (cycles per minute).
[2] Current will fluctuate at frequencies below 5 Hz.
[3] Conversion Factor 1g = 9.81 m/s².
[4] Typical.
[5] See PCB Declaration of Conformance PS039 or PS053 for details.
Accessories:
Supplied
081A40Mounting Stud(1)
ICS-4NIST-traceable single-axis amplitude response calibration from 0 cpm (0 Hz) to upper 10% frequency for 4 - 20 mA output vibration sensor(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
 ENGLISHSI
    Hazardous Area ApprovalEEx ia IIC T4, -40°C≤Ta≤80°C, II 1 G
    Hazardous Area ApprovalEEx nL IIC T4, -40°C≤Ta≤80°C, II 3 G
    Hazardous Area ApprovalDIV I, CL I, II, III, GRPS A-G, Exia, AExia, IIC T4
    Hazardous Area ApprovalDIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
(M) Metric Mount
Accessories:
    M081A61Mounting Stud(1)
(RV) Buffered Analog Signal Output - 100 mV/g (±20%)
 ENGLISHSI
    Electrical Connector3-Pin MIL-C-5015
    Electrical Connections (Pin A)4-20 mA Pos (+)
    Electrical Connections (Pin B)4-20 mA Neg/Signal Output Neg
    Electrical Connections (Pin C)Signal Output Pos
Product Documents
Additional Downloads