Log In

Log In

Need an Account? Start Here

 
607A01 - Platinum Stock Products;Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 2-pin MIL conn. & swiveler base, single point ISO 17025 accredited calibration
Click to zoom

Model: 607A01

$225.00 USD
(Pricing valid in US only)

Datasheet

Platinum Stock Products;Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 2-pin MIL conn. & swiveler base, single point ISO 17025 accredited calibration

US patent number 6.435.902

  • Sensitivity: (±15%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 3.7 oz (105 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±50 g±490 m/s² 
Frequency Range (±3 dB)30 to 600000 cpm0.5 to 10000 Hz 
Resonant Frequency1080 kcpm18 kHz[2] 
Broadband Resolution (1 to 10000 Hz)350 µg3434 µm/sec2[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Electrical
Settling Time (within 1% of bias)≤2.0 sec≤2.0 sec 
Discharge Time Constant≥0.3 sec≥0.3 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)8 µg/√Hz78.5 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)5 µg/√Hz49.1 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)4 µg/√Hz39.2 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex7/8 in22 mm 
Size - Height1.23 in31.2 mm 
Weight3.7 oz105 gm 
MountingStudStud 
Mounting Thread1/4-28 Male1/4-28 Male 
Mounting Torque (Stud)3 to 4 ft-lb4.1 to 5.4 Nm[4][5] 
Mounting Torque (hex nut)2 to 3 ft-lb2.7 to 4.1 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/8" hex Allen key required for English version, 3mm hex Allen key required for metric version.
[5] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080A162Mounting Stud(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
 ENGLISHSI
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area ApprovalCl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area ApprovalCl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area ApprovalEx ia IIC T4, AExia IIC, T4
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
(M) Metric Mount
 ENGLISHSI
Accessories:
    M080A163AAccessory for IMI Sensors Product(1)
    M080A163AAccessory for IMI Sensors Product(1)
(TO) Temperature Output
 ENGLISHSI
    Temperature Output Range+36 to +250 °F+2 to +121 °C
    Temperature Scale Factor5.56 mV/°F + 32+10 mV/°C
    Electrical Connector3-Pin MIL-C-5015
    Electrical Connections (Pin A)Acceleration Output
    Electrical Connections (Pin B)Ground
    Electrical Connections (Pin C)Temperature Output