Log In

Log In

Need an Account? Start Here

 

Model: 603M113

$184.00 USD
(Pricing valid in US only)


Low power, industrial, ceramic shear accel, 100 mV/g, 1.6 to 10k Hz, top exit, 3-pin conn., single point ISO 17025 accredited calibration

  • Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 96 to 600000 cpm (1.6 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±20 g (±196 m/s²)
  • Weight: 2.0 oz (56.7 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±20 g±196 m/s² 
Frequency Range (±3 dB)96 to 600000 cpm1.6 to 10000 Hz[4] 
Resonant Frequency1500 kcpm25 kHz[2] 
Broadband Resolution (1 to 10000 Hz)1.5 mg15 mm/s²[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Electrical
Settling Time (within 1% of bias)≤5.0 sec≤5.0 sec 
Discharge Time Constant≥0.1 sec≥0.1 sec 
Excitation Voltage3 to 12 VDC3 to 12 VDC 
Output Impedance<100 Ohm<100 Ohm 
Output Bias Voltage1.5 to 6.0 VDC1.5 to 6.0 VDC 
Spectral Noise (10 Hz)18 µg/√Hz176.6 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)4 µg/√Hz39.2 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)2 µg/√Hz19.6 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex11/16 in18 mm 
Size - Height1.86 in47.2 mm 
Weight2.0 oz56.7 gm 
Mounting Thread1/4-28 FemaleNo Metric Equivalent[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector3-Pin MIL-C-50153-Pin MIL-C-5015 
Electrical Connection PositionTopTop 
Electrical Connections (Pin A)Pos (+) PowerPos (+) Power 
Electrical Connections (Pin B)GroundGround 
Electrical Connections (Pin C)SignalSignal 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
Accessories:
Supplied
081A40Mounting Stud(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads