low power, industrial, ceramic shear accel, 100 mv/g, 1.6 to 10k hz, top exit, 3-pin conn., single point iso 17025 accredited calibration

Industrial Accelerometer

Model 603M113

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low power, industrial, ceramic shear accel, 100 mV/g, 1.6 to 10k Hz, top exit, 3-pin conn., single point ISO 17025 accredited calibration

  • Sensitivity: (±20%)100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB)96 to 600000 cpm (1.6 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 2.0 oz (56.7 gm)

Specification Notes


[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS107 for details.

English: SI:
Performance
Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1]
Measurement Range (12 VDC) ±50 g ±490 m/s² [4]
Measurement Range (5 VDC) ±15 g ±147 m/s² [4]
Frequency Range (±3 dB) 96 to 600000 cpm 1.6 to 10000 Hz [3]
Resonant Frequency 1500 kcpm 25 kHz [4]
Broadband Resolution (1) 1.5 mg 15 mm/s² [4]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
Discharge Time Constant ≥0.1 sec ≥0.1 sec
Excitation Voltage 5 to 12 VDC 5 to 12 VDC
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 2.5 to 6.0 VDC 2.5 to 6.0 VDC
Spectral Noise (10 Hz) 18 µg/√Hz 176.6 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 11/16 in 18 mm
Size - Height 1.86 in 47.2 mm
Weight 2.0 oz 56.7 gm
Mounting Thread 1/4-28 Female No Metric Equivalent [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
Electrical Connection Position Top Top
Electrical Connections (Pin A) Pos (+) Power Pos (+) Power
Electrical Connections (Pin B) Ground Ground
Electrical Connections (Pin C) Signal Signal

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1