Log In

Log In

Need an Account? Start Here


Model: 602M64

Add to Cart for Quote

Low power, industrial, ceramic shear ICP® accel., 100 mV/g, 1.5 to 8000 Hz, low profile with side exit, 2-pin connector, single point ISO 17025 accredited calibration

  • Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 90 to 480000 cpm (1.5 to 8000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±45 g (±441 m/s²)
  • Weight: 2.61 oz (74.0 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±10 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±45 g±441 m/s²[5] 
Frequency Range (±3 dB)90 to 480000 cpm1.5 to 8000 Hz[3] 
Resonant Frequency1500 kcpm25 kHz[4] 
Broadband Resolution (1 to 10000 Hz)2 mg19.6 mm/s²[4] 
Non-Linearity±1 %±1 %[2] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤5.0 sec≤5.0 sec 
Discharge Time Constant≥0.1 sec≥0.1 sec 
Excitation Voltage3 to 12 VDC3 to 12 VDC 
Output Impedance<100 Ohm<100 Ohm 
Current Draw0.5 mA0.5 mA[4] 
Output Bias Voltage1.5 to 6 VDC1.5 to 6 VDC 
Spectral Noise (10 Hz)18 µg/√Hz176.6 (µm/sec2)/√Hz[4] 
Spectral Noise (100 Hz)4 µg/√Hz39.2 (µm/sec2)/√Hz[4] 
Spectral Noise (1 kHz)2 µg/√Hz19.6 (µm/sec2)/√Hz[4] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Length1.65 in41.9 mm 
Size - Width0.74 in18.8 mm 
Size - Height0.845 in21.5 mm 
Weight2.61 oz74.0 gm 
Mounting Thread1/4-28 MaleNo Metric Equivalent[6] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector3-Pin MIL-C-50153-Pin MIL-C-5015 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Dependent on excitation voltage
[6] 1/4-28 has no equivalent in S.I. units.
081A97Thru bolt 1/4-28(1)
Optional Versions:
(M) Metric Mount
    M081A97Captive Mounting Bolt(1)
Product Documents
Additional Downloads