Log In

Log In

Need an Account? Start Here

 

Model: 602M138

$155.00 USD
(Pricing valid in US only)


Low profile, industrial, ceramic shear ICP® accel., 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration, for use with Echo® system

  • Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 24 to 480000 cpm (0.4 to 8000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±80 g (±785 m/s²)
  • Weight: 2.61 oz (74.0 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±10 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±80 g±785 m/s² 
Frequency Range (±3 dB)24 to 480000 cpm0.4 to 8000 Hz[4] 
Resonant Frequency1500 kcpm25 kHz[2] 
Broadband Resolution550 µg5395 µm/sec2[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Electrical
Settling Time (within 1% of bias)≤2.0 sec≤2.0 sec 
Discharge Time Constant≥0.4 sec≥0.4 sec 
Excitation Voltage24 to 28 VDC24 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage10 to 14 VDC10 to 14 VDC 
Spectral Noise (10 Hz)10 µg/√Hz98.1 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)7 µg/√Hz68.7 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)7 µg/√Hz68.7 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Length1.65 in41.9 mm 
Size - Width0.74 in18.8 mm 
Size - Height0.845 in21.5 mm 
Weight2.61 oz74.0 gm 
Mounting Thread1/4-28 MaleNo Metric Equivalent[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A97Thru bolt 1/4-28(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads