Log In

Log In

Need an Account? Start Here

 

Model: 601A92

Add to Cart for Quote
Datasheet

General purpose, low-noise, industrial, ceramic shear ICP® accel, 500 mV/g, 0.17 to 10k Hz, top exit, 4-pin M12 connector, single point ISO 17025 accredited calibration

  • Sensitivity: (±20%) 500 mV/g (51 mV/(m/s²))
  • Frequency Range: (±3dB) 10 to 600000 cpm (0.17 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±10 g (±98 m/s²)
  • Weight: 2.8 oz (80 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)500 mV/g51 mV/(m/s²)[1] 
Measurement Range±10 g±98 m/s² 
Frequency Range (±5 %)28 to 240000 cpm0.47 to 4000 Hz[3] 
Frequency Range (±10 %)20 to 300000 cpm0.33 to 5000 Hz 
Frequency Range (±3 dB)10 to 600000 cpm0.17 to 10000 Hz 
Resonant Frequency960 kcpm16 kHz[4] 
Broadband Resolution (1 to 10000 Hz)35 µg343 µm/sec2[4] 
Non-Linearity±1 %±1 %[2] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] 
Enclosure RatingIP68, IP69KIP68, IP69K 
Electrical
Settling Time (within 1% of bias)≤10 sec≤10 sec 
Discharge Time Constant≥1.0 sec≥1.0 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)3 µg/√Hz29.4 (µm/sec2)/√Hz[4] 
Spectral Noise (100 Hz)0.7 µg/√Hz6.9 (µm/sec2)/√Hz[4] 
Spectral Noise (1 kHz)0.5 µg/√Hz4.9 (µm/sec2)/√Hz[4] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex7/8 in22.2 mm 
Size - Height1.82 in46.3 mm 
Weight2.8 oz80 gm 
Mounting Thread1/4-28 FemaleNo Metric Equivalent[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing Material316L Stainless Steel316L Stainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector4-Pin, M124-Pin, M12 
Electrical Connection PositionTopTop 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A40Mounting Stud(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(M) Metric Mount
 ENGLISHSI
Accessories:
    M081A61Mounting Stud(1)
Product Documents
Additional Downloads