Log In

Log In

Need an Account? Start Here


Model: 601A61

$270.00 USD
(Pricing valid in US only)

Low-noise, industrial, ceramic shear ICP® accel, 100 mV/g, 0.27 to 10k Hz, top exit, 10-ft integral armor cable, single point ISO 17025 accredited calibration

  • Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 16 to 600000 cpm (0.27 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 2.8 oz (80 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±20 %) 100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±50 g±490 m/s² 
Frequency Range (±3 dB)16 to 600000 cpm0.27 to 10000 Hz[4] 
Resonant Frequency960 kcpm16 kHz[2] 
Broadband Resolution (1 to 10000 Hz)50 µg491 µm/sec2[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤4.0 sec≤4.0 sec 
Discharge Time Constant≥0.6 sec≥0.6 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)3.2 µg/√Hz31.0 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)1.0 µg/√Hz9.81 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)0.7 µg/√Hz6.94 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex7/8 in22 mm 
Size - Height4.5 in114 mm 
Weight (without cable)2.8 oz80 gm 
Mounting Thread1/4-28 FemaleNot Applicable[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorIntegral Armored CableIntegral Armored Cable 
Electrical Connection PositionTopTop 
Cable Length10 ft3.0 m 
Cable TypePolyurethanePolyurethane[6] 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] Stainless steel armor jacket over twisted shielded pair.
[7] See PCB Declaration of Conformance PS023 for details.
081A40Mounting Stud(1)
Optional Versions:
(M) Metric Mount
    M081A61Mounting Stud(1)
(TO) Temperature Output
    Temperature Output Range+36 to +250 +2 to +121
    Temperature Scale Factor5.56 mV/°F + 32+10 mV/°C
    Electrical Connections (Red)Acceleration Output
    Electrical Connections (Black)Ground
    Electrical Connections (White)Temperature Output
    Electrical Connections (Green)Ground
Product Documents
Additional Downloads