Log In

Log In

Need an Account? Start Here

 

Model: 176A05

$4,035.00 USD
(Pricing valid in US only)

Datasheet

Differential charge output pressure sensor, 52.0 pC/psi, 968 F, ATEX-CSA approved

When using Model EX682A40 differential charge amplifier, also use 045M21B cable.

  • Measurement Range: 75 psi (5.2 bar)
  • Sensitivity: (±20%) 65 pC/psi (942.7 pC/bar)
  • Sensing Element: Ceramic
  • Temperature Range: -94 to 968 °F (-70 to 520 °C)
  • Electrical Connector: 7/16-27 2-Pin
  • Weight: 9.35 oz (265 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)65 pC/psi942.7 pC/bar 
Measurement Range75 psi5.2 bar 
Maximum Pressure (Total)1450 psi100 bar 
Resonant Frequency>40 kHz>40 kHz 
Transverse Resonance≥8 kHz≥8 kHz 
Frequency Response (+/-5 %)8 kHz8 kHz[2][3] 
Non-Linearity≤1 % FS≤1 % FS[1] 
Environmental
Acceleration Sensitivity0.003 psi/g.00021 bar/g[5] 
Acceleration Sensitivity0.01 psi/g.00069 bar/g[4] 
Temperature Range (Operating)-94 to 968 °F-70 to 520 °C 
Temperature Range (Storage)-76 to 500 °F-60 to 260 °C 
Temperature ResponseSee Graph See Graph  
Hazardous Area ApprovalSee ManualSee Manual 
Radiation Exposure Limit (Integrated Gamma Flux)1E8 rad1E8 rad 
Radiation Exposure Limit (Integrated Neutron Flux)1E10 N/cm²1E10 N/cm² 
Electrical
Output PolarityDifferentialDifferential 
Capacitance (with cable pin - pin)650 pF650 pF[6] 
Internal Resistance (room temp)≥1000000000 Ohm≥1000000000 Ohm 
Insulation Resistance (Pin-Case ) (room temp)≥1000000000000 Ohm≥1000000000000 Ohm 
Internal Resistance (968°F/520°C)≥50000 Ohm≥50000 Ohm 
Insulation Resistance (Pin-Case ) (968°F/520°C)≥100000 Ohm≥100000 Ohm 
Physical
Sensing ElementCeramicCeramic 
Sensing GeometryCompressionCompression 
Housing MaterialNickel AlloyNickel Alloy 
SealingWelded HermeticWelded Hermetic 
Electrical Connector7/16-27 2-Pin7/16-27 2-Pin 
Cable TypeOverbraided HardlineOverbraided Hardline 
Weight (with cable)9.35 oz265 gm 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Low frequency response is determined by external signal conditioning electronics.
[3] Upper frequency response is calculated from Resonant Frequency.
[4] Maximum.
[5] Nominal.
[6] Typical.
[7] See PCB Declaration of Conformance PS058 for details.
Accessories:
No Accessories
Optional Versions:
No optional versions