Products

FORCE SENSOR

Model 200C50

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

ICP® quartz force sensor, impact, 50k lb comp., 0.10 mV/lb, 10-32 ele. conn., stainless steel construction, hermetically sealed

Measurement Range: 50000 lb (222.4 kN)
Sensitivity: (±15%)0.10 mV/lb (22.48 mV/kN)
Low Frequency Response: (-5%)0.0003 Hz
Upper Frequency Limit: 30000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)
Mounting Thread: 1/4-28 Female (Not Applicable)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	0.10 mV/lb	22.48 mV/kN
Measurement Range (Compression)	50000 lb	222.4 kN
Maximum Static Force (Compression)	75000 lb	333.6 kN
Broadband Resolution (1)	1 lb-rms	4.45 N-rms	[2]
Low Frequency Response (-5 %)	0.0003 Hz	0.0003 Hz	[3]
Upper Frequency Limit	30000 Hz	30000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.15 %/°F	≤0.27 %/°C
Electrical
Discharge Time Constant (at room temp)	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Spectral Noise (1 Hz)	0.10 lb/√Hz	0.45 N/√Hz	[2]
Spectral Noise (10 Hz)	0.0304 lb/√Hz	0.14 N√Hz	[2]
Spectral Noise (100 Hz)	0.00807 lb/√Hz	0.0360 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.00193 lb/√Hz	0.00862 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	97 lb/µin	17 kN/µm	[2]
Size - Diameter	2.125 in	53.9 mm
Size - Height	0.750 in	19.0 mm
Weight	9.9 oz	280 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	1/4-28 Female	Not Applicable

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
081A06	Mounting stud, 1/4-28 to 1/4-28 thds x 0.365", no shoulder	1
081B20	Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder	1
084A36	Impact cap, convex (for Model 200C50)	1
M081A61	Mounting stud, 1/4-28 to M6x1 x 9.65 mm long, BeCu w/shoulder	1