icp® quartz force sensor, impact, 50k lb comp., 0.10 mv/lb, 10-32 ele. conn., stainless steel construction, hermetically sealed

ICP® Force Sensor

Model 200C50

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

ICP® quartz force sensor, impact, 50k lb comp., 0.10 mV/lb, 10-32 ele. conn., stainless steel construction, hermetically sealed

  • Measurement Range: 50000 lb (222.4 kN)
  • Sensitivity: (±15%)0.10 mV/lb (22.48 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 30000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Mounting Thread: 1/4-28 Female (Not Applicable)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.10 mV/lb 22.48 mV/kN
Measurement Range (Compression) 50000 lb 222.4 kN
Maximum Static Force (Compression) 75000 lb 333.6 kN
Broadband Resolution (1) 1 lb-rms 4.45 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 30000 Hz 30000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.15 %/°F ≤0.27 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise (1 Hz) 0.10 lb/√Hz 0.45 N/√Hz [2]
Spectral Noise (10 Hz) 0.0304 lb/√Hz 0.14 N√Hz [2]
Spectral Noise (100 Hz) 0.00807 lb/√Hz 0.0360 N/√Hz [2]
Spectral Noise (1000 Hz) 0.00193 lb/√Hz 0.00862 N/√Hz [2]
Output Polarity (Compression) Positive Positive
Physical
Stiffness 97 lb/µin 17 kN/µm [2]
Size - Diameter 2.125 in 53.9 mm
Size - Height 0.750 in 19.0 mm
Weight 9.9 oz 280 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 1/4-28 Female Not Applicable

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81 Thread lock adhesive (for Series 200) 1
081A06 Mounting stud, 1/4-28 to 1/4-28 thds x 0.365", no shoulder 1
081B20 Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder 1
084A36 Impact cap, convex (for Model 200C50) 1
M081A61 Mounting stud, 1/4-28 to M6x1 x 8.6 mm long, BeCu w/shoulder 1

Optional Versions


(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


M081A61
Model: M081A61

Mounting stud, 1/4-28 to M6x1 x 8.6 mm l...

$10.00 USD

(Pricing valid only in the U.S.)

084A36
Model: 084A36

Impact cap, convex (for Model 200C50)

$240.00 USD

(Pricing valid only in the U.S.)

081A06
Model: 081A06

Mounting stud, 1/4-28 to 1/4-28 thds x 0...

$47.00 USD

(Pricing valid only in the U.S.)

081B20
Model: 081B20

Mounting stud, 1/4-28 to 1/4-28 x 0.365"...

$10.00 USD

(Pricing valid only in the U.S.)