Model : 426A11 | Microphone Preamplifier

Call for lead time
$ 800.00 USD
(Pricing valid in US only!)

1/2-inch ICP® preamplifier with gain and filter switches (for prepolarized microphones)

ICP(R) low noise preamplifier with gain, filters, and TEDS

  • Nominal Microphone Diameter: 1/2"
  • Temperature Range: -4 to +158 °F (-20 to +70 °C)
  • Output Voltage: 5 Vpk
  • Size - Length: 4.25 in (108.0 mm)

RELATED PRODUCTS



079A11

Microphone holder (for 1/2-inch microphones)



Add to Cart for Quote
Add To Cart
079A15

Microphone stand (with boom attachment & adaptor)



Add to Cart for Quote
Add To Cart
079A18

Clamp-on flexible extension arm



Add to Cart for Quote
Add To Cart
079B16

Miniature desktop tripod stand for microphones



Add to Cart for Quote
Add To Quote
English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Gain (re 1 kHz) -0.16 dB -0.16 dB [1] [3]
Filter Type (3-pole Butterworth) High Pass High Pass [5]
Electrical Filter Corner Frequency 20 Hz 20 Hz [1]
Filter Type A-weight A-weight [4] [5]
Frequency Response (±0.2 dB) 5 to 125000 Hz 5 to 125000 Hz [6] [8]
Frequency Response (±1.6 dB) (A-weight Filter Engaged) 12.6 to 20000 Hz 12.6 to 20000 Hz [6] [8]
Frequency Response (±1.0 dB) (A-weight Filter Engaged) 20 to 10000 Hz 20 to 10000 Hz [1] [8]
Frequency Response (±0.3 dB) (+20 dB Gain) 4 to 25000 Hz 4 to 25000 Hz [8]
Phase Linearity (-3 to +10 °) 5 to 20 Hz 5 to 20 Hz [3] [9]
Phase Linearity (±3 °) 20 to 20000 Hz 20 to 20000 Hz [3] [9]
Electrical Noise (A Weight, 0 dB Gain) <7.5 µV <7.5 µV [3] [7]
Electrical Noise (A Weight, 0 dB Gain) 5 µV 5 µV [1] [3] [7]
Electrical Noise (0 dB Gain) <5.7 µV <5.7 µV [3] [7]
Electrical Noise (0 dB Gain) 4.2 µV 4.2 µV [1] [3] [7]
Electrical Noise (+20 dB Gain) <60 µV <60 µV [3] [7]
Electrical Noise (+20 dB Gain) 40 µV 40 µV [1] [3] [7]
Electrical Noise (High Pass Filter, 0 dB Gain) <5.6 µV <5.6 µV [3] [7]
Electrical Noise (High Pass Filter, 0 dB Gain) 3.7 µV 3.7 µV [1] [3] [7]
Distortion (5 V pk output at 1 kHz) <-60 dB <-60 dB [3]
Output Slew Rate 2 V/µS 2 V/µS [1]
TEDS Compliant Yes Yes [2]
Environmental
Temperature Range (Operating) -4 to +158 °F -20 to +70 °C
Temperature Response <0.05 dB <0.05 dB
Humidity Range (Non-Condensing) 0 to 95 %RH 0 to 95 %RH
Humidity Sensitivity <0.05 dB <0.05 dB
Electrical
Excitation Voltage 22 to 34 VDC 22 to 34 VDC
Constant Current Excitation 4 to 20 mA 4 to 20 mA
Impedance (Input) 10 GOhm 10 GOhm [1]
Capacitance (Input) 0.28 pF 0.28 pF [1]
Output Bias Voltage 15 VDC 15 VDC [1]
Maximum Input Voltage (0 dB gain) 5 Vpk 5 Vpk [5]
Maximum Input Voltage (+20 dB gain) 0.5 Vpk 0.5 Vpk [5]
Impedance (at 1 kHz ) (Output) <50 Ohm <50 Ohm
Output Voltage (Maximum) 5 Vpk 5 Vpk
Physical
Housing Material Stainless Steel Stainless Steel
Size - Diameter 0.5 in 12.7 mm
Size - Length 4.25 in 108.0 mm
Weight 1.5 oz 43.7 gm
Electrical Connector BNC Jack BNC Jack
Mounting Thread (Microphone to Preamplifier) 0.4606 - 60 UNS 11.7 mm - 60 UNS
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Typical.
[2] TEDS Capable Digital Memory and Communication, compliant with IEEE P1451.4
[3] Measured with an 18 pF reference microphone.
[4] Per IEC 61672-1:2002 "Sound Level Meters" Class 1
[5] Overload detection is in front of filters. Positive pulses at output indicate overload.
[6] Error from ideal A weight re 1 kHz.
[7] 20 Hz to 20 kHz
[8] re 1 kHz
[9] Without Filter or +20 dB gain engaged.
[1] Typical.
[5] Overload detection is in front of filters. Positive pulses at output indicate overload.
[10] See PCB Declaration of Conformance PS074 for details.


Accessories


Supplied
ERC-16 Calibration of ICP® microphone preamplifier 1


Product Videos