Model : 356A26 | Accelerometer, ICP®, Triaxial

Click for lead times
Lead Time for 1-10 is 8 Wks
Lead Time for 11-20 is 10 Wks
$ 1,135.00 USD
(Pricing valid in US only!)

Platinum Stock Products; Triaxial, general purpose, ceramic shear ICP® accel, 50 mV/g, 1 to 5k Hz, 4-pin conn.

  • Sensitivity: (±10%)50 mV/g (5.1 mV/(m/s²))
  • Measurement Range: ±100 g pk (±981 m/s² pk)
  • Electrical Connector: 1/4-28 4-Pin

RELATED PRODUCTS



010G10

4-conductor, shielded, FEP cable, 10-ft, 4-socket plug to (3) BNC plugs (labeled X,Y,Z)



Add to Cart for Quote
Add To Cart
034G10

4-conductor, low noise, shielded FEP cable, 10-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)



Add to Cart for Quote
Add To Cart
034W10

4-conductor, shielded, lightweight, FEP cable, 10-ft, 4-socket plug, IP68 rated to triple splice assembly with (3) 1-ft coaxial cables each with a BNC plug (AC)



Add to Cart for Quote
Add To Cart
078G10

4-conductor, twisted shielded, Polyurethane cable, 10-ft, 4-socket plug to (3) BNC plugs (labeled X, Y, Z)



Add to Cart for Quote
Add To Cart
078W10

4-conductor, shielded, flexible, Polyurethane cable, 10-ft, 4-socket plug, IP-68 rated to triple splice assembly with (3) 1-ft coaxial cables each with a BNC plug (AC)



Add to Cart for Quote
Add To Cart
036G10

4-conductor, silicone jacket cable, 10-ft, 4-pin plug to (3) BNC plugs (labeled X, Y, Z)



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±10 %) 50 mV/g 5.1 mV/(m/s²)
Measurement Range ±100 g pk ±981 m/s² pk
Frequency Range (±5 %) 1 to 5000 Hz 1 to 5000 Hz
Frequency Range (±10 %) 0.7 to 6500 Hz 0.7 to 6500 Hz
Resonant Frequency ≥25 kHz ≥25 kHz
Broadband Resolution (1) 0.0002 g rms 0.002 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±7000 g pk ±68600 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C [3]
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 24 to 30 VDC 24 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.4 to 1.0 sec 0.4 to 1.0 sec
Settling Time (within 10% of bias) <3 sec <3 sec
Spectral Noise (1 Hz) 75 µg/√Hz 736 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 15 µg/√Hz 147 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 1 µg/√Hz 9.8 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.55 in 14.0 mm
Size - Length 0.80 in 20.3 mm
Size - Width 0.55 in 14.0 mm
Weight 0.37 oz 10.5 gm [2]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female
Mounting Torque 10 to 20 in-lb 113 to 225 N-cm
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 250° F to 325° F data valid with HT option only.
[2] Typical.
[4] TEDS option adds 1.0 VDC to bias voltage.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A12 Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1


Optional Versions


( HT ) High temperature, extends normal operation temperatures
English SI
Frequency Range (&#177;5 %) 6 to 5000 Hz
Frequency Range (&#177;10 %) 5 to 5000 Hz
Temperature Range -65 to +325 °F -54 to +163 °C
Discharge Time Constant 0.08 to 0.5 sec
Broadband Resolution 0.0004 g rms 0.004 µm/sec2 rms
Spectral Noise 130 µg/√Hz 1275 (µm/sec2)/√Hz
Spectral Noise 30 µg/√Hz 294 (µm/sec2)/√Hz
Spectral Noise 10 µg/√Hz 98.1 (µm/sec2)/√Hz
Spectral Noise 2 µg/√Hz 19.6 (µm/sec2)/√Hz
Spectral Noise 3 µg/√Hz 29.4 (µm/sec2)/√Hz
Output Bias Voltage 7 to 16


( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
English SI
Output Bias Voltage 8.7 to 13.0 VDC


( TLA ) TEDS LMS International - Free Format
English SI
Output Bias Voltage 8.7 to 13.0 VDC


( TLB ) TEDS LMS International - Automotive Format
English SI
Output Bias Voltage 8.7 to 13.0 VDC


( TLC ) TEDS LMS International - Aeronautical Format
English SI
Output Bias Voltage 8.7 to 13.0 VDC


( TLD ) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
English SI
Output Bias Voltage 8.7 to 13.0