Model : 1102-02A | Strain Gage Load Cell

Click for lead times
Lead Time for 1-1 is 4 Wks
Lead Time for 0-0 is 0 Wks
$ 896.00 USD
(Pricing valid in US only!)

PCB L&T Canister load cell, 100 lbf (445 N) rated capacity, 50% static overload protection, 2mV/V output, 1/4-28 UNF-2B threads, PT02E-10-6P connector, aluminum construction

  • Measurement Range: 100 lb (445 N)
  • Size - Diameter: 2.75 in (69.9 mm)
  • Size - Height: 1.5 in (38.1 mm)
  • Electrical Connector: PT02E-10-6P
English: SI:
Performance
Measurement Range 100 lb 445 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.05 % FS ≤0.05 % FS
Hysteresis ≤0.05 % FS ≤0.05 % FS
Non-Repeatability ≤0.02 % FS ≤0.02 % FS
Creep (in 20 minutes) ≤.025 % ≤.025 %
Static Error Band ≤.05 % FS ≤.05 % FS
Eccentric Load Sensitivity ≤.025 %/in ≤.025 %/25.4mm
Resonant Frequency 3.8 kHz 3.8 kHz
Environmental
Overload Limit 150 lb 667 N
Load Limit (Side Force, FX or FY) 100 lb 445 N [3]
Load Limit (Bending Moment, MX or MY) 100 in-lb 11 Nm [3]
Load Limit (Axial Torque, MZ) 65 in-lb 7 Nm [3]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.0015 %Reading/°F ±0.0027 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.0008 %FS/°F ±0.0015 %FS/°C [4]
Electrical
Bridge Resistance 700 Ohm 700 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity +Tension +Tension
Physical
Size - Height 1.5 in 38.1 mm [7]
Size - Diameter 2.75 in 69.9 mm [7]
Weight 0.67 lb 304 g
Mounting Thread 1/4-28 Female No Metric Equivalent
Housing Material Painted Aluminum Painted Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.003 in 0.08 mm
Electrical Connector PT02E-10-6P PT02E-10-6P
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 51277 for Complete Dimensions


Accessories


Optional
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. 1
8311-01-10A Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable 1