Log In

Log In

Need an Account? Start Here

 

Model: 66212APZ1

$97.00 USD
(Pricing valid in US only)

Datasheet

Low cost embeddable accelerometer, TO-5 with 100 mV/g sensitivity, 2-wire ICP®, positive output, header pins

  • Sensitivity: (±20%) 100 mV/g (1.02 mV/(m/s²))
  • Frequency Range: (±3dB) 0.5 to 10k Hz (0.5 to 10k Hz)
  • Sensing Element: Ceramic
  • Measurement Range: 50 g (490 m/s²)
  • Weight: 0.01 oz (3 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)100 mV/g1.02 mV/(m/s²)[1][2] 
Measurement Range50 g490 m/s² 
Frequency Range (±3 dB)0.5 to 10k Hz0.5 to 10k Hz[3][6] 
Resonant Frequency>25 kHz>25 kHz[3] 
Broadband Resolution350 µg rms3434 µm/sec2 rms[5] 
Non-Linearity≤1 %≤1 %[4] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49k m/s² pk 
Temperature Range (Operating)-65 to +185 °F-54 to -84 °C 
Temperature ResponseSee Graph See Graph [5] 
Electrical
Settling Time (within 1% of bias)≤2 sec≤2 sec 
Discharge Time Constant≥0.3 sec≥0.3 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage (±10 %)8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)8 µg/√Hz78.50 (µm/sec2)/√Hz[5] 
Spectral Noise (100 Hz)5 µg/√Hz49.1 (µm/sec2)/√Hz[5] 
Spectral Noise (1 kHz)4 µg/√Hz39.2 (µm/sec2)/√Hz[5] 
Physical
Size - Lip Diameter0.36 in9.1 mm 
Size - Height0.38 in9.7 mm 
Weight0.01 oz3 gm 
MountingAdhesive/SolderAdhesive/Solder 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorHeader PinsHeader Pins 
Electrical Connection PositionBottomBottom 
Electrical Connections (Pin 1)Signal / PowerSignal / Power 
Electrical Connections (Pin 2)Neg (-) GroundNeg (-) Ground 
Electrical Connections (Pin 3)No ConnectionNo Connection 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Positive output along Z-axis (in upward direction when pin mounted).
[3] Performance depends on mounting
[4] Zero-based, least-squares, straight line method.
[5] Typical.
[6] The high frequency tolerance is accurate within ±10% of the specified frequency.
[7] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(HT) High temperature, extends normal operation temperatures
 ENGLISHSI
    Temperature Range (Operating)-65 to 250 -54 to 121
Product Documents
Additional Downloads