Log In

Log In

Need an Account? Start Here


Model: 607M83

$301.00 USD
(Pricing valid in US only)

Low power, industrial ICP® accel, 100 mV/g, 1.5 to 10k Hz, side exit, low profile with swiveler base, 10-ft integral cable, single point ISO 17025 accredited calibration

  • Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 90 to 600000 cpm (1.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±45 g (±441 m/s²)
  • Weight: 1.1 oz (31 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±20 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±45 g±441 m/s²[4] 
Frequency Range (±3 dB)90 to 600000 cpm1.5 to 10000 Hz 
Resonant Frequency1500 kcpm25 kHz[2] 
Broadband Resolution (1 to 10000 Hz)2 mg19.6 mm/s²[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤5.0 sec≤5.0 sec 
Discharge Time Constant≥0.1 sec≥0.1 sec 
Excitation Voltage3 to 12 VDC3 to 12 VDC 
Output Impedance<100 Ohm<100 Ohm 
Current Draw0.5 mA0.5 mA 
Output Bias Voltage1.5 to 6 VDC1.5 to 6 VDC 
Spectral Noise (10 Hz)18 µg/√Hz176.6 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)4 µg/√Hz39.2 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)2 µg/√Hz19.6 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex9/16 in14 mm 
Size - Height0.97 in24.6 mm 
Weight (without cable)1.1 oz31 gm[5] 
Mounting Thread1/4-28 MaleNo Metric Equivalent[6] 
Mounting Torque (Stud)7 to 8 ft-lb9.5 to 10.8 Nm[7][8] 
Mounting Torque (hex nut)2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorMolded Integral CableMolded Integral Cable 
Electrical Connection PositionSideSide 
Cable TerminationBlunt cutBlunt cut 
Electrical Connections (Red)Pos (+) PowerPos (+) Power 
Electrical Connections (Black)GroundGround 
Electrical Connections (White)Acceleration OutputAcceleration Output 
Cable Length10 ft3.0 m 
Cable TypePolyurethanePolyurethane 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] Full range requires adequate bias voltage.
[5] Measured with mounting stud.
[6] 1/4-28 has no equivalent in S.I. units.
[7] 1/8" hex Allen key required for English version, 4 mm hex Allen key required for Metric version.
[8] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
080A156Mounting Base(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(M) Metric Mount
    M080A159Swivel Mounting Stud(1)