Log In

Log In

Need an Account? Start Here


Model: 603C05

$163.00 USD
(Pricing valid in US only)

General purpose, industrial, ceramic shear ICP® accel., 50 mV/g, top exit, 2-pin conn., single point ISO 17025 accredited calibration

  • Sensitivity: (±20%) 50 mV/g (5.1 mV/(m/s²))
  • Frequency Range: (±3dB) 72 to 600000 cpm (1.2 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±100 g (±981 m/s²)
  • Weight: 1.8 oz (51 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±20 %)50 mV/g5.1 mV/(m/s²)[1] 
Measurement Range±100 g±981 m/s² 
Frequency Range (±3 dB)72 to 600000 cpm1.2 to 10000 Hz[3] 
Resonant Frequency1500 kcpm25 kHz[4] 
Broadband Resolution (1 to 10000 Hz)750 µg7358 µm/sec2[4] 
Non-Linearity±1 %±1 %[2] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤2.0 sec≤2.0 sec 
Discharge Time Constant≥0.4 sec≥0.4 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)18 µg/√Hz176 (µm/sec2)/√Hz[4] 
Spectral Noise (100 Hz)10 µg/√Hz98.1 (µm/sec2)/√Hz[4] 
Spectral Noise (1 kHz)7 µg/√Hz68.7 (µm/sec2)/√Hz[4] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex11/16 in18 mm 
Size - Height1.65 in42.2 mm 
Weight1.8 oz51 gm 
Mounting Thread1/4-28 FemaleNo Metric Equivalent[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
Electrical Connection PositionTopTop 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
081A40Mounting Stud(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area ApprovalCl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area ApprovalEx ia IIC T4, AExia IIC, T4
    Hazardous Area ApprovalCl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
(M) Metric Mount
    M081A61Mounting Stud(1)
(TO) Temperature Output
    Temperature Output Range+36 to +250 °F+2 to +121 °C
    Temperature Scale Factor5.56 mV/°F + 32+10 mV/°C
    Electrical Connector3-Pin MIL-C-5015
    Electrical Connections (Pin A)Acceleration Output
    Electrical Connections (Pin C)Temperature Output
    Electrical Connections (Pin B)Ground
    Size - Height1.86 in47.2
    Weight2.0 oz56.7
Product Documents
Additional Downloads