Log In

Log In

Need an Account? Start Here

 

Model: 422E51

$288.00 USD
(Pricing valid in US only)

Datasheet

In-line charge converter, 100 mV/pC, +/-5V output, -5% frequency 5 Hz

  • Sensitivity: (±5.0%) 100 mV/pC
  • Output Voltage: ±5.0 V
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Housing Material: Stainless Steel

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±5.0 %) (Charge Conversion)100 mV/pC100 mV/pC 
Input Range±50 pC±50 pC 
Overrange±8 V±8 V 
Low Frequency Response (-5 %)5 Hz5 Hz 
High Frequency Response (-5 %)100 kHz100 kHz[1] 
Non-Linearity1.0 % FS1.0 % FS 
Environmental
Temperature Range (Operating)-65 to +250 °F-54 to +121 °C 
Maximum Shock5000 g pk49050 m/s² pk 
Maximum Vibration (5 to 2000 Hz)100 g pk981 m/s² pk 
Electrical
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Output Bias Voltage9 to 13 VDC9 to 13 VDC 
Output Voltage±5.0 V±5.0 V 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance100 Ohm100 Ohm 
Output PolarityInvertedInverted 
Maximum Input Voltage40 V40 V 
Broadband Electrical Noise (1 to 10000 Hz)49 µV-86 dB[2] 
Spectral Noise (1 Hz)19 µV/√Hz-94 dB[2] 
Spectral Noise (10 Hz)5.1 µV/√Hz-106 dB[2] 
Spectral Noise (100 Hz)1.5 µV/√Hz-116 dB[2] 
Spectral Noise (1 kHz)0.6 µV/√Hz-124 dB[2] 
Spectral Noise (10 kHz)0.2 µV/√Hz-134 dB[2] 
Capacitance (Feedback)10 pF10 pF 
Overload Recovery Time10 µsec10 µsec 
Discharge Time Constant>0.1 sec>0.1 sec 
Resistance (Feedback)120000000000 Ohm120000000000 Ohm[3] 
Source Capacitance Loading0.0005 %/pF0.0005 %/pF 
Physical
Housing MaterialStainless SteelStainless Steel 
SealingEpoxyEpoxy 
Electrical Connector (Input)10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connector (Output)BNC JackBNC Jack 
Size - Diameter0.52 in13 mm 
Size - Length3.4 in86 mm 
Weight1.15 oz32.7 gm 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] High frequency response may be limited by supply current and output cable length.
[2] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[3] Effective feedback resistance for time constant is 3 times tested value due to circuitry (i.e 1x10E9 = 3x10E9 ohm)
[4] See PCB Declaration of Conformance PS024 for details. A low impendance connection from case to earth ground is required to maintain CE compliance.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads