Log In

Log In

Need an Account? Start Here


Model: 301A12

Add to Cart for Quote

Calibration ICP® Shock Accel., 0.5 mV/g, 10,000 g, 1 to 10 kHz, 10-32 side conn., 1/4-28 Stud Bottom, 1/4-28 Top

  • Sensitivity: (±20%) 0.5 mV/g (0.051 mV/(m/s²))
  • Measurement Range: ±10000 g pk (±98100 m/s² pk)
  • Broadband Resolution: 0.02 g rms (0.20)
  • Frequency Range: (±5%) 1 to 10000 Hz
  • Sensing Element: Quartz

Add this product to my product comparison
Compare selected models ()

Sensitivity (±20 %)0.5 mV/g0.051 mV/(m/s²) 
Measurement Range±10000 g pk±98100 m/s² pk 
Frequency Range (±5 %)1 to 10000 Hz1 to 10000 Hz 
Resonant Frequency≥30 kHz≥30 kHz 
Broadband Resolution0.02 g rms0.20 [1] 
Non-Linearity (per 1000 g (9810 m/s2))≤0.1 %≤0.1 % 
Transverse Sensitivity≤3 %≤3 % 
Overload Limit±12500 g pk±122625 m/s² pk 
Temperature Range-65 to 250 °F-54 to 121 °C 
Excitation Voltage18 to 30 VDC18 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<100 <100  
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Discharge Time Constant0.5 to 2.0 sec0.5 to 2.0 sec[1] 
Size - Height1.43 in36.3 mm 
Weight1.5 oz42 gm[1] 
Sensing ElementQuartzQuartz 
Size - Hex5/8 in5/8 in 
Sensing GeometryShearShear 
Housing Material17-4 Stainless Steel17-4 Stainless Steel 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread (Shaker Mount)1/4-28 Male1/4-28 Male 
Mounting Thread (Unit Under Test Mount)1/4-28 Female1/4-28 Female 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Typical.
[2] See PCB Declaration of Conformance PS023 for details.
081A08Mounting Stud (10-32 to 1/4-28)(2)
081B20Mounting Stud, with shoulder (1/4-28 to 1/4-28)(2)
ACS-1NIST traceable frequency response (10 Hz to upper 5% point).(1)
ACS-14High G shock accelerometer calibration using Hopkinson bar.(1)
M081B20Mounting Stud 1/4-28 to M6 X 0.75(2)
Optional Versions:
No optional versions
Product Documents
Additional Downloads