Log In

Log In

Need an Account? Start Here


Model: 205C

$1,275.00 USD
(Pricing valid in US only)

ICP® quartz force ring, 60k lb comp., 0.08 mV/lb

  • Measurement Range: 60000 lb (266.9 kN)
  • Sensitivity: (±15%) 0.08 mV/lb (18.0 mV/kN)
  • Low Frequency Response: 0.0003 Hz
  • Upper Frequency Limit: 50000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±15 %)0.08 mV/lb18.0 mV/kN 
Measurement Range (Compression)60000 lb266.9 kN 
Maximum Static Force (Compression)70000 lb311.4 kN 
Broadband Resolution (1 to 10000 Hz)1 lb-rms4.45 N-rms[2] 
Low Frequency Response0.0003 Hz0.0003 Hz[3] 
Upper Frequency Limit50000 Hz50000 Hz[4] 
Non-Linearity≤1.5 % FS≤1.5 % FS[1] 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.10 %/°F≤0.18 %/°C 
Discharge Time Constant (at room temp)≥2000 sec≥2000 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.0981 lb/√Hz0.44 N/√Hz[2] 
Spectral Noise (10 Hz)0.0306 lb/√Hz0.14 N√Hz[2] 
Spectral Noise (100 Hz)0.00709 lb/√Hz0.032 N/√Hz[2] 
Spectral Noise (1000 Hz)0.00192 lb/√Hz0.00857 N/√Hz[2] 
Output Polarity (Compression)PositivePositive 
Preload12000 lb53.379 kN 
Stiffness40 lb/µin7 kN/µm[2] 
Size - Diameter1.580 in40.13 mm 
Size - Height0.510 in12.95 mm 
Size - Bolt Diameter.75 in20 mm 
Size - ID (Hole Diameter)0.830 in21.08 mm 
Size - OD (Sensor)1.580 in40.13 mm 
Size - Sensing Surface1.375 in34.93 mm 
Weight2.7 oz77 gm 
Housing MaterialStainless SteelStainless Steel 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
080A82Assembly Lubricant(1)
081A15Mounting Stud, 5/8-18 x 1.650, BeCu(1)
082B05Anti-friction washer (for Models 205B and 215B)(1)
083B05Pilot bushing (for Models 205C and 215B)(1)
Optional Versions:
(M) Metric Mount
    M081A15Mounting Stud, M16 x 1.50 x 1.650, BeCu(1)
    M083B05Pilot Bushing(1)
(N) Negative Output Polarity
(W) Water Resistant Cable
    Electrical ConnectorSealed Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads