Log In

Log In

Need an Account? Start Here

208C02 - Platinum Stock Products; Multi-purpose, ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb
Click to zoom

Model: 208C02

$420.00 USD
(Pricing valid in US only)

Platinum Stock Products; Multi-purpose, ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb

  • Measurement Range: 100 lb (0.4448 kN)
  • Sensitivity: (±15%) 50 mV/lb (11241 mV/kN)
  • Low Frequency Response: (-5%) 0.001 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Mounting Thread: 10-32 Female

Add this product to my product comparison
Compare selected models ()

Sensitivity (±15 %)50 mV/lb11241 mV/kN 
Measurement Range (Compression)100 lb0.4448 kN 
Measurement Range (Tension)100 lb0.4448 kN 
Maximum Static Force (Compression)600 lb2.669 kN 
Maximum Static Force (Tension)500 lb2.224 kN 
Broadband Resolution (1 to 10000 Hz)0.001 lb-rms0.004 N-rms[2] 
Low Frequency Response (-5 %)0.001 Hz0.001 Hz[3] 
Upper Frequency Limit36000 Hz36000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[1] 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.05 %/°F≤0.09 %/°C 
Discharge Time Constant (at room temp)≥500 sec≥500 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.000135 lb/√Hz0.000603 N/√Hz[2] 
Spectral Noise (10 Hz)0.0000276 lb/√Hz0.000123 N√Hz[2] 
Spectral Noise (100 Hz)0.00000956 lb/√Hz0.0000427 N/√Hz[2] 
Spectral Noise (1000 Hz)0.00000212 lb/√Hz0.00000946 N/√Hz[2] 
Output Polarity (Compression)PositivePositive 
Stiffness6 lb/µin1.05 kN/µm[2] 
Size - Hex0.625 in15.88 mm 
Size - Height0.625 in15.88 mm 
Size - Sensing Surface0.500 in12.7 mm 
Weight0.80 oz22.7 gm 
Housing MaterialStainless SteelStainless Steel 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
080A81Thread Locker(1)
081B05Mounting Stud (10-32 to 10-32)(2)
084A03Impact Cap(1)
M081A62Mounting stud, 10-32 to M6 x 1, BeCu with shoulder(2)
Optional Versions:
(N) Negative Output Polarity
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
    Output Bias Voltage8 to 15 VDC
(W) Water Resistant Cable
Product Documents
Additional Downloads