platinum stock products: low-noise, industrial, ceramic shear icp® accel, 500 mv/g 0.17 to 10k hz, top exit, 2-pin conn. single point iso 17025 accredited calibration
platinum

Low-cost Industrial ICP® Accelerometer

Model 601A02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
169 Lead Time for 1-10 is 14 Dys.
Lead Time for 11-25 is 3 Wks.
  • CE
  • IP

Platinum Stock Products: Low-noise, industrial, ceramic shear ICP® accel, 500 mV/g 0.17 to 10k Hz, top exit, 2-pin conn. single point ISO 17025 accredited calibration

  • Sensitivity: (±20%)500 mV/g (51 mV/(m/s²))
  • Frequency Range: (±3dB)10 to 600000 cpm (0.17 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±10 g (±98 m/s²)
  • Weight: 2.8 oz (80 gm)

Specification Notes


[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±20 %) 500 mV/g 51 mV/(m/s²) [1]
Measurement Range ±10 g ±98 m/s²
Frequency Range (±5 %) 28 to 240000 cpm 0.47 to 4000 Hz [3]
Frequency Range (±10 %) 20 to 300000 cpm 0.33 to 5000 Hz
Frequency Range (±3 dB) 10 to 600000 cpm 0.17 to 10000 Hz
Resonant Frequency 960 kcpm 16 kHz [4]
Broadband Resolution (1) 35 µg 343 µm/sec2 [4]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤10 sec ≤10 sec
Discharge Time Constant ≥1.0 sec ≥1.0 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <150 Ohm <150 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise (10 Hz) 3 µg/√Hz 29.4 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 0.7 µg/√Hz 6.9 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 7/8 in 22.2 mm
Size - Height 1.94 in 49.3 mm
Weight 2.8 oz 80 gm
Mounting Thread 1/4-28 Female N/A [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Sealing Welded Hermetic Welded Hermetic
Electrical Connection Position Top Top

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1