fastener load washer, metric, m16, 140 kn  (31.4 klbf), 5-ft  integral cable w/pigtails

LOAD WASHER LOAD CELL - M16 FASTENER

Model 054216-01144

  • IP

Fastener Load Washer, Metric, M16, 140 kN (31.4 klbf), 5-ft Integral Cable w/pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf
  • Measurement Range: 31473 lb (140 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 1.350 in (34.29 mm)
  • Size - Height: 0.525 in (13.34 mm)

Specification Notes


[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions

English: SI:
Performance
Measurement Range (Full Scale Capacity) 31473 lb 140 kN [1]
Sensitivity (output at rated capacity) 1.50 mV/V 1.50 mV/V [1] [2]
Non-Linearity ±5 % FS ±5 % FS [2]
Hysteresis ±5 % FS ±5 % FS [2]
Non-Repeatability ±2 % FS ±2 % FS [2]
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 47210 lb 210 kN
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0018 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0018 %FS/°C [2]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [4]
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity (Compression) Positive Positive
Isolation Resistance ≥1G Ohm ≥1G Ohm
Physical
Size - Height 0.525 in 13.34 mm [5]
Size - Diameter 1.350 in 34.29 mm
Fastener Size NO EQUIV 16 mm
Through Hole Diameter 0.636 in 16.15 mm
Sensing Element Strain Gage Strain Gage
Electrical Connector Pigtail Ends Pigtail Ends
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080922-01000 Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual 0
080962-01000 Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case 0
Supplied
7122R-007502 1
92160-032315 1
92160-032316 1