triaxial mems shock accelerometer, 20kg, thru hole mount, integral 10-ft silicone cable terminating in pigtails

TRIAXIAL HIGH AMPLITUDE MEMS SHOCK ACCELEROMETER

Model 3503A1120KG

  • CE
  • IP

Triaxial MEMS Shock accelerometer, 20kG, thru hole mount, integral 10-ft silicone cable terminating in pigtails

  • Sensitivity: (±50%)0.010 mV/g (0.001 mV/(m/s²))
  • Measurement Range: ±20000 g (±196100 m/s² pk)
  • Frequency Range: (1dB)0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Through Holes (2)
  • Weight: 0.1 oz (2.83 gm)

Additional configurations:

Specification Notes


[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[1] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[1] Typical.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[2] Verified with test data provided on supplied calibration certificate.
[7] Individually tested to ensure compliance with specified value.
[1] Typical.
[8] See PCB Declaration of Conformance PS153 for details.

English: SI:
Performance
Sensitivity (±50 %) (at 10 VDC excitation) 0.010 mV/g 0.001 mV/(m/s²) [2]
Sensitivity 0.001 mV/V/g 0.0001 mV/V/(m/s²) [3]
Measurement Range ±20000 g ±196100 m/s² pk
Frequency Range (1 dB) 0 to 10000 Hz 0 to 10000 Hz
Resonant Frequency >60 kHz >60 kHz
Damping Ratio 5 % Critical 5 % Critical [1]
Non-Linearity (per 10,000 g (98,100 m/s²)) ±1 % ±1 %
Transverse Sensitivity ≤3 % ≤3 %
Environmental
Overload Limit (Shock) ±60000 g pk ±588000 m/s² pk [5]
Overload Limit (Mechanical Stops) ≥30000 g ≥294200 m/s² pk
Temperature Range (Storage) -65 to 250 °F -54 to 121 °C
Temperature Range (Operating) -65 to 250 °F -54 to 121 °C
Temperature Coefficient of Sensitivity -0.11 %/°F -0.20 %/°C [1]
Zero g Offset Temperature Shift ±10 mV ±10 mV [4]
Base Strain Sensitivity 0.10 g/µε 0.98 (m/s²)/µε [1]
Electrical
Excitation Voltage (Maximum) 15.0 VDC 15.0 VDC
Current Consumption <12 mA <12 mA
Input Resistance (±700 Ohm) 2000 Ohm 2000 Ohm [1] [2]
Output Resistance (±2000 Ohm) 6000 Ohm 6000 Ohm [1] [2]
Offset Voltage ±40 mVDC ±40 mVDC [2]
Settling Time 0.01 sec 0.01 sec [6]
Electrical Isolation (Base) ≥10000000 Ohm ≥10000000 Ohm [7]
Physical
Sensing Element Piezoresistive MEMS Piezoresistive MEMS
Sensing Geometry Full Active Full Active
Housing Material Titanium Titanium
Sealing Epoxy Epoxy
Size - Height 0.25 in 6.35 mm
Size - Length 0.47 in 11.81 mm
Size - Width 0.47 in 11.81 mm
Weight (without cable) 0.1 oz 2.83 gm [1]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Type 8-Cond., shielded, silcone jacket 8-Cond., shielded, silcone jacket
Cable Termination Pigtail Ends Pigtail Ends
Cable Length 10 ft 3.05 m
Mounting Through Holes (2) Through Holes (2)
Mounting Torque 6 to 8 in-lb 68 to 90 N-cm

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081B114 Mtg Hardware (3503 series), set of 2-each screw and washer 1
ACS-62T Calibration of High G triaxial PR Accelerometer, 10.0 VDC excitation 1