triax force sensor, icp®, 1000 lb (fx,y,z), 2.5 mv/lb (fz), 5 mv/lb (fx,y), ground isolated

ICP TRIAX FORCE SENSOR

Model 260B02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Triax force sensor, ICP®, 1000 lb (Fx,y,z), 2.5 mV/lb (Fz), 5 mV/lb (Fx,y), ground isolated

  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Electrical Connector: 4-Pin

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Sensitivities are dependent upon supplied bolt.
[2] Typical.
[4] Preload should be at least 10 times the X and Y operating range used.
[5] See PCB White Paper WPL_88_1121 for details.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±20 %) (Z Axis) 2.5 mV/lb 0.56 mV/N [3]
Sensitivity (±20 %) (X or Y Axis) 5 mV/lb 1.12 mV/N [3]
Measurement Range (Z Axis) 1000 lb 4.45 kN
Measurement Range (X or Y Axis) 1000 lb 4.45 kN
Maximum Force (Z Axis) 1320 lb 5.87 kN
Maximum Force (X or Y Axis) 1,100 lb 4.89 kN
Maximum Moment (Z Axis) 58 ft-lb 78.6 Nm
Maximum Moment (X or Y Axis) 96 ft-lb 130.2 Nm
Broadband Resolution (Z axis) 0.005 lb-rms 0.0222 N-rms [2]
Broadband Resolution (X or Y axis) 0.003 lb-rms 0.0133 N-rms [2]
Low Frequency Response (-5 %) (Z-Axis) 0.01 Hz 0.01 Hz
Low Frequency Response (-5 %) (X or Y Axis) 0.001 Hz 0.001 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Cross Talk (between X and Y Axis) ±3 % ±3 %
Cross Talk (between (X or Y Axis) and Z Axis) ±5 % ±5 %
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Electrical
Full Scale Output (Z Direction) ±2.5 VDC ±2.5 VDC
Full Scale Output (X and Y Direction) ±5 VDC ±5 VDC
Discharge Time Constant (Z Axis) ≥50 sec ≥50 sec
Discharge Time Constant (X or Y Axis) ≥500 sec ≥500 sec
Excitation Voltage (all channels) 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation (all channels) 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise (1 Hz) (X & Y) 0.001 lb/√Hz .0044 N√Hz
Spectral Noise (10 Hz) (X & Y) 0.0003 lb/√Hz 0.00133 N√Hz
Spectral Noise (100 Hz) (X & Y) 0.00008 lb/√Hz 0.000356 N√Hz
Spectral Noise (1,000 Hz) (X & Y) 0.00002 lb/√Hz 0.000089 N√Hz
Spectral Noise (1 Hz) (Z) 0.002 lb/√Hz 0.0089 N√Hz
Spectral Noise (10 Hz) (Z) 0.0005 lb/√Hz 0.00222 N√Hz
Spectral Noise (100 Hz) (Z) 0.0002 lb/√Hz 0.00089 N√Hz
Spectral Noise (1000 Hz) (Z) 0.00005 lb/√Hz 0.000222 N√Hz
Output Polarity Positive Positive
Electrical Isolation ≥1000000 Ohm ≥1000000 Ohm
Physical
Preload 10000 lb 44.48 kN [4]
Stiffness (X or Y Axis) 3.4 lb/µin 602 N/µm [2] [5]
Stiffness (Z Axis) 16.5 lb/µin 2,886 N/µm [2] [5]
Stiffness (RX or RY Axis) 1.3E6 lbf*in/radian 1.4E5 N*m/radian [2] [5]
Stiffness (RZ Axis) 1.5E6 lbf*in/radian 1.7E5 N*m/radian [2] [5]
Coupled Stiffness 0.4 lbf*in/µin 1.8 N*m/µm [2] [5]
Weight 1.545 oz 43.79 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 4-Pin 4-Pin
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A74 BeCu pre-load bolt, 1/2-20 to 1/2-20, 1.100 inch for Models 260B02, 260B12, 260B32, 260A02, 260A12 & 260A32 1
082M12 Anti-friction washer for Models 260A02, 260A12, 260A32 260B02, 260B12 & 260B32 1
083A13 Pilot bushing for Models 260A02, 260A12, 260A32, 260B02, 260B12 & 260B32 1
M081A74 BeCu pre-load bolt, M12x1.25 to M12x1.25, 1.100 inch for Models 260B02, 260B12, 260B32, 260A02, 260A12 & 260A32 1

Optional Versions


(W) Water Resistant Cable

English SI
Electrical Connection Position Side

Build Out Your Measurement Chain


010G20
Model: 010G20

4-conductor, shielded, FEP cable, 20-ft,...

$190.00 USD

(Pricing valid only in the U.S.)

010T20
Model: 010T20

4-conductor, shielded, FEP cable, 20-ft,...

$221.00 USD

(Pricing valid only in the U.S.)

260B11
Model: 260B11

Triax force sensor, charge, 1000 lb (Fz)...

$2,265.00 USD

(Pricing valid only in the U.S.)

261B02
Model: 261B02

Triax force link, ICP®, 1000 lb (Fx,y,z)...

$5,400.00 USD

(Pricing valid only in the U.S.)

M081A74
Model: M081A74

BeCu pre-load bolt, M12x1.25 to M12x1.25...

$42.00 USD

(Pricing valid only in the U.S.)

482C24
Model: 482C24

4-channel, line powered, ICP® sensor sig...

$2,352.00 USD

(Pricing valid only in the U.S.)