uht-12™ shear triaxial icp® accelerometer, 100 mv/g, 0.3 to 4k hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient ltc, +356f temp rating, teds 1.0

TRIAXIAL ICP? ACCELEROMETER TEDS1.0 LTC

Model TLD339A37

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

UHT-12™ shear triaxial ICP® accelerometer, 100 mV/g, 0.3 to 4k Hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient LTC, +356F temp rating, TEDS 1.0

Electrical Filter Corner Frequency: >15 kHz

Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490.5 m/s² pk)
Electrical Connector: 1/4-28 4-Pin

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Increased current up to 20mA acceptable to 250F (121C)
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±50 g pk	±490.5 m/s² pk
Frequency Range (±5 %)	0.3 to 4000 Hz	0.3 to 4000 Hz
Frequency Range (±10 %)	0.2 to 7000 Hz	0.2 to 7000 Hz
Resonant Frequency	≥35 kHz	≥35 kHz
Filter Type	single pole	single pole
Electrical Filter Roll-off	20 dB/decade	20 dB/decade
Electrical Filter Corner Frequency	≥15 kHz	≥15 kHz
Broadband Resolution (1)	0.002 g rms	0.019 m/s² rms	[2]
Phase Response (±5 °) (at 70°F [21°C])	3 to 2000 Hz	3 to 2000 Hz
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
TEDS Compliant (Per IEEE 1451.4)	Yes	Yes
Environmental
Overload Limit (Shock)	±5000 g pk	±49000 m/s² pk
Temperature Range (Operating)	-65 to 356 °F	-54 to 180 °C
Temperature Response	See Graph	See Graph	[2]
Temperature Coefficient of Sensitivity	≤0.011 %/°F	≤0.020 %/°C	[2]
Base Strain Sensitivity	.001 g/µε	.0098 (m/s²)/µε	[2]
Electrical
Excitation Voltage	21 to 30 VDC	21 to 30 VDC
Constant Current Excitation	2 to 4 mA	2 to 4 mA	[3]
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	8 to 15 VDC	8 to 15 VDC
Discharge Time Constant	2 to 6 sec	2 to 6 sec
Settling Time (within 10% of bias)	<30 sec	<30 sec
Spectral Noise (1 Hz)	210 µg/√Hz	2060 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	40 µg/√Hz	392 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	20 µg/√Hz	196 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	12 µg/√Hz	118 (µm/sec²)/√Hz	[2]
Spectral Noise (10 kHz)	10 µg/√Hz	98 (µm/sec²)/√Hz	[2]
Physical
Sensing Element	UHT-12™	UHT-12™
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	0.55 in	14.0 mm
Size - Length	0.80 in	20.3 mm
Size - Width	0.55 in	14.0 mm
Weight	0.37 oz	10.5 gm	[2]
Electrical Connector	1/4-28 4-Pin	1/4-28 4-Pin
Electrical Connection Position	Side	Side
Mounting Thread	5-40 Female	5-40 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
010S10	4-conductor, shielded, FEP cable, 10-ft, 1/4-28 4-socket plug for 200C to triple splice assembly with (3) 1-ft coaxial cables each with a BNC plug (AC connector)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A145	Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
081A27	Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu	1
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable	1
M081A27	Metric mtg stud, 5-40 to M3 x 0.50 long	1