intrinsically safe 378b02 microphone and preamplifier, atex, iecex, etl,  anzex, approved

ICP MICROPHONE SYSTEM

Model EX378B02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • EX
  • IP

Intrinsically safe 378B02 microphone and preamplifier, ATEX, IECEx, ETL, ANZEx, approved

INDUSTRY EXCLUSIVE 1/2" prepolarized condenser microphone system. It is Hazardous Locations & Explosive Atmospheres compliant and can safely be employed in gaseous hazardous environments where standard microphones may cause a spark and fire. 


The EX378B02 includes a 1/2" Free-field microphone cartridge, preamplifier, and system calibration,  compliant with Intrinsic Safe

  • Nominal Microphone Diameter: 1/2"
  • Frequency Response Characteristic: Free-Field
  • Frequency Range: (±2dB)3.75 to 20000 Hz (3.75 to 20000 Hz)
  • Inherent Noise: 15.5 dB(A) re 20 µPa
  • Dynamic Range: 137 dB re 20 µPa

Specification Notes


[1] Typical.
[2] re 250 Hz
[1] Typical.
[2] re 250 Hz
[3] Prepolarized
[1] Typical.
[4] Venting through Preamp.
[5] See PCB Declaration of Conformance PS172 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Frequency Response Characteristic (at 0° incidence) Free-Field Free-Field
Sensitivity (±1.5 dB) -26 dB re 1 V/Pa -26 dB re 1 V/Pa [2]
Sensitivity 50 mV/Pa 50 mV/Pa [2]
Frequency Range (±2 dB) 3.75 to 20000 Hz 3.75 to 20000 Hz
Frequency Range (±1 dB) 7 to 10000 Hz 7 to 10000 Hz
Lower Limiting Frequency (3) 1.0 to 3.0 Hz 1.0 to 3.0 Hz
Inherent Noise 15.5 dB(A) re 20 µPa 15.5 dB(A) re 20 µPa [1]
Dynamic Range (3% Distortion Limit) 137 dB re 20 µPa 137 dB re 20 µPa [1]
Environmental
Temperature Range (Operating) -40 to +176 °F -40 to +80 °C
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) 0.005 dB/°F 0.009 dB/°C [1] [2]
Static Pressure Coefficient -0.013 dB/kPa -0.013 dB/kPa [1] [2]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.001 dB/%RH ±0.001 dB/%RH [2]
Influence of Axial Vibration (0.1g (1 m/s²)) 63 dB re 20 µPa 63 dB re 20 µPa [1]
Electrical
Polarization Voltage 0 V 0 V [3]
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Maximum Output Voltage ±7 Vpk ±7 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear [4]
Electrical Connector BNC Jack BNC Jack
Mounting Thread (Grid) 0.5 - 60 UNS 0.5 - 60 UNS
Size - Diameter (with grid) 0.52 in 13.2 mm
Size - Diameter (without grid) 0.50 in 12.7 mm
Size - Height (with grid) 4.02 in 102.1 mm
Size - Height (without grid) 3.99 in 101.2 mm
Weight 1.87 oz 53 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-63 Calibration for microphone/preamplifier with TEDS programming 1

Build Out Your Measurement Chain


079A06
Model: 079A06

Windscreen (for 1/2-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A11
Model: 079A11

Microphone holder (for 1/2-inch micropho...

$50.00 USD

(Pricing valid only in the U.S.)

079A15
Model: 079A15

Microphone stand (with boom attachment &...

$80.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)