handheld vibration shaker 1g (rms or peak) at 159.2 hz operating frequency and max 8.8 oz load capacity, aa battery powered or optional model 073a16 ac adaptor, includes protective carrying case

HANDHELD SHAKER

Model 699B02

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 4 Wks.
Lead Time for 6-10 is 5 Wks.
  • CE
  • IP

Handheld vibration shaker 1g (rms or peak) at 159.2 Hz operating frequency and max 8.8 oz load capacity, "AA" battery powered or optional model 073A16 AC adaptor, includes protective carrying case

  • Operating Frequency: (±1%)159.2 Hz
  • Acceleration Output: (±3%)1 g rms (9.81 m/s² rms)
  • Maximum Load: 8.8 oz (250 gm)
  • Velocity Output: 0.39 in/sec rms (9.81 mm/s rms)
  • Displacement Output: 0.39 mil rms (9.81 µm rms)

Specification Notes

[1] Approximate values, based on automatic switch off time and dependent on type of batteries.
[2] Unit supplied set to auto shut off; see manual for continuous use selection.
[3] Calculated values for reference only.
[4] Unit supplied set to rms; see manual for peak selection.
[5] For sensors weighing <75 grams add model 080A136 mass
[6] Typical max for range
[7] Typical.
[1] Approximate values, based on automatic switch off time and dependent on type of batteries.
[8] Alkaline type recommended for longest service life.
[7] Typical.
[9] Test sensor should be hand tightened (without tools).
[10] Transducer to shaker table.
[11] See PCB Declaration of Conformance PS022 for details.

English: SI:
Performance
Operating Frequency (±1 %) 159.2 Hz 159.2 Hz
Acceleration Output (±3 %) 1 g rms 9.81 m/s² rms [4]
Velocity Output 0.39 in/sec rms 9.81 mm/s rms [3]
Displacement Output 0.39 mil rms 9.81 µm rms [3]
Transverse Output ≤3 % ≤3 %
Distortion (0 to 250 grams load) 7 % 7 % [6]
Maximum Load 8.8 oz 250 gm [5]
Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [2]
Calibration Cycles (250 gram load) 90 cycles 90 cycles [1]
Environmental
Temperature Range (Operating) 15 to 130 °F -10 to 55 °C
Electrical
Ramp-Up time ≤3 sec ≤3 sec [7]
Power Required (Standard) Internal Battery Internal Battery
Power Required (Alternate) DC Power DC Power
Internal Battery (Quantity) 4 4
Internal Battery (Type) AA AA [8]
DC Power (±5 %) 12 VDC 12 VDC
DC Power 1.67 Amps 1.67 Amps
Battery Life (250 gram load) 2.3 hours 2.3 hours [1]
Physical
Size - Height 7.8 in 200 mm
Weight (with batteries) 31 oz 900 gm [7]
Mounting Thread 1/4-28 Female No Metric Equivalent [9] [10]
Mounting Torque (Maximum) to 10 in-lb to 10 in-lb [10]
Size - Diameter 2.2 in 56 mm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
073A15 Battery clip for the 394C06 hand held shaker 1
080A136 75 gr adapter mass for CAL-VT vibration calibrator to use with lighter sensors 1
081A08 Mounting stud, 10-32 to 1/4-28 x 0.30" long, BeCu 1
M081A19 Mounting stud, 1/4-28 to M6 x 1, SS w/shoulder 1
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 2