triaxial, ceramic shear icp® accel., 10-32 int thread, 100 mv/g, 0.5 to 3k hz, titanium hsg, 1/4-28 4-pin conn, 0.55 in

TRIAXIAL ICP® ACCELEROMETER do not sell

Model 356M265

Add to Quote
  • CE
  • IP

Triaxial, ceramic shear ICP® accel., 10-32 int thread, 100 mV/g, 0.5 to 3k Hz, titanium hsg, 1/4-28 4-pin conn, 0.55 in

TLD356M132 with new housing. Triax TLD333M07 with 5-40 stud hole on each axis. Mini 4-pin connector with minimized mass. Mass target <10 grams. Low freq to 0.1 Hz by DTC measurement, 0.5 by calibration at -5%. Upper +5% is 3 kHz.
  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Measurement Range: ±50 g pk (±491 m/s² pk)
  • Electrical Connector: 1/4-28 4-Pin

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] TEDS Capable Digital Memory and Communication, compliant with IEEE P1451.4
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ±50 g pk ±491 m/s² pk
Frequency Range (+7/-5 %) 0.5 to 3000 Hz 0.5 to 3000 Hz
Frequency Range (±10 %) 0.2 to 4000 Hz 0.2 to 4000 Hz
Resonant Frequency ≥14 kHz ≥14 kHz
Broadband Resolution (1) 0.00007 Hz 0.0007 m/s² rms [2]
Phase Response (±2 °) (at 70°F [21°C]) 2 to 3000 Hz 2 to 3000 Hz
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
TEDS Compliant (Per IEEE 1451.4) Yes Yes [3]
Environmental
Overload Limit (Shock) ±5000 g pk ±49000 m/s² pk
Temperature Range (Operating) -15 to +150 °F -26 to +66 °C
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 7.5 to 13 VDC 7.5 to 13 VDC
Discharge Time Constant 3 to 8 sec 3 to 8 sec
Settling Time (within 10% of bias) <30 sec <30 sec
Spectral Noise (1 Hz) 25 µg/√Hz 245 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 6 µg/√Hz 60 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 2 µg/√Hz 20 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 1 µg/√Hz 9.8 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.55 in 14.0 mm
Size - Length 0.90 in 22.9 mm
Size - Width 0.55 in 14.0 mm
Weight 0.42 oz 12 gm [2]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 in-lb 45 to 56 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A145 Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1