TRIAX FORCE SENSOR

Model 260A13

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

Triax force sensor, 10k lb (Fz), 4k lb (Fx,y), 15 pC/lb (z), 32 pC/lb (x, y)

Temperature Range: -100 to +350 °F (-73 to +177 °C)
Electrical Connector: 10-32 Coaxial Jack

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[3] Typical.
[4] Preload should be at least 10 times the X and Y operating range used.

	English:	SI:
Performance
Sensitivity (±15 %) (Z Axis)	15 pC/lb	3.37 pC/N	[2]
Sensitivity (±15 %) (X or Y Axis)	32 pC/lb	7.19 pC/N	[2]
Measurement Range (Z Axis)	10000 lb	44.48 kN
Measurement Range (X or Y Axis)	4000 lb	17.7 kN
Maximum Force (Z Axis)	11000 lb	48.93 kN
Maximum Force (X or Y Axis)	4400 lb	19.57 kN
Maximum Moment (Z Axis)	240 ft-lb	325.4 Nm
Maximum Moment (X or Y Axis)	325 ft-lb	440.7 Nm
Upper Frequency Limit	39000 Hz	39000 Hz
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Cross Talk (between X and Y Axis)	±3 %	±3 %
Cross Talk (between (X or Y Axis) and Z Axis)	±5 %	±5 %
Environmental
Temperature Range	-100 to +350 °F	-73 to +177 °C
Electrical
Capacitance (all channels)	70 pF	70 pF	[3]
Insulation Resistance (all channels)	≥1000000000000 Ohm	≥1000000000000 Ohm
Output Polarity (in direction of markings)	Negative	Negative
Physical
Preload	≤40000 lb	≤178 kN	[4]
Stiffness (X or Y Axis)	11.4 lb/µin	2.0 kN/µm	[3]
Stiffness (Z Axis)	38.8 lb/µin	6.8 kN/µm	[3]
Size - Height	0.790 in	20.07 mm
Size - Length	2.25 in	57.1 mm
Size - Width	2.25 in	57.1 mm
Size - Bolt Diameter	1 in	25 mm
Size - ID	1.023 in	25.98 mm
Size - Sensing Surface	1.800 in	45.72 mm
Weight	9.88 oz	280 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector (Quantity, 3)	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A71	BeCu pre-load bolt, 7/8-14 to 7/8-14, 2.400 inch for Models 260B03, 260B13, 260B33, 260A03, 260A13 & 260A33	1
082B06	Anti-friction washer for Models (M)206C, (M)216B, 260A03, 260A13, 260A33, 260B03, 260B13 & 260B33	1
083A11	Pilot bushing for Models 260A03, 260A13, 260A33, 260B03, 260B13 & 260B33	1
M081A71	BeCu pre-load bolt, M24x3 to M24x3, 2.400 inch for Models 260B03, 260B13, 260B33, 260A03, 260A13 & 260A33	1