acoustic icp® pressure sensor, 3 psi, 1500 mv/psi, integral 2-wire cable, accel. comp.

PRESSURE SENSOR

Model 103B01

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Acoustic ICP® pressure sensor, 3 psi, 1500 mV/psi, integral 2-wire cable, accel. comp.

    Specification Notes

    [1] Zero-based, least-squares, straight line method.
    [2] Typical.
    [3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
    [2] Typical.
    [4] See PCB Declaration of Conformance PS023 for details.

    English: SI:
    Performance
    Measurement Range 3.00 psi 180.3 dB
    Useful Overrange 6.00 psi 186.3 dB [3]
    Sensitivity (±15 %) 1500 mV/psi 217.5 mV/kPa
    Maximum Pressure 250 psi 1724 kPa
    Resolution 0.02 mpsi 77 dB [2]
    Resonant Frequency ≥13 kHz ≥13 kHz
    Rise Time ≤25 µ sec ≤25 µ sec
    Low Frequency Response (-5 %) 5 Hz 5 Hz
    Non-Linearity ≤2.0 % FS ≤2.0 % FS [1]
    Environmental
    Acceleration Sensitivity 0.0005 psi/g 0.0035 kPa/(m/s²) [2]
    Temperature Range (Operating) -100 to 250 °F -73 to 121 °C
    Temperature Coefficient of Sensitivity ≤0.2 %/°F ≤0.36 %/°C
    Maximum Flash Temperature 1000 °F 538 °C
    Maximum Shock 1000 g pk 9807 m/s² pk
    Maximum Vibration 1000 g pk 9807 m/s² pk
    Electrical
    Discharge Time Constant 0.1 to 2.0 sec 0.1 to 2.0 sec
    Excitation Voltage 20 to 30 VDC 20 to 30 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance ≤100 Ohm ≤100 Ohm
    Output Bias Voltage 7 to 13 VDC 7 to 13 VDC
    Physical
    Sensing Element Ceramic Ceramic
    Housing Material Stainless Steel Stainless Steel
    Diaphragm 316L Stainless Steel 316L Stainless Steel
    Sealing Epoxy Epoxy
    Electrical Connector Integral Cable Integral Cable
    Cable Termination Pigtail Ends Pigtail Ends
    Weight 0.115 oz 3.260 gm
    Cable Type 32 AWG stranded wires 32 AWG stranded wires
    Cable Length 15 in 38.1 cm

    * All specifications are at room temperature unless otherwise specified.

    Accessories
    Supplied
    070B09 Solder connector adaptor (10-32 plug to solder terminal, straight pins for both terminals) 1
    PCS-1 Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. 0
    PCS-24 0
    061A04 Sleeve clamp, 4-40 cap screw (for Models 103A & 103A11) 2
    065A66 Adhesive mounting ring (for Series 103B) 3

    Optional Versions

    (M) Metric Mount
    Accessories:
    Supplied M061A04 Clamp 2