Portable Vibration Calibration for Machinery Health Monitoring

Shakers and portable calibration units are available for on-site validations.

From IMI Sensors

Handheld Shaker

Handheld Shaker – 699B02

The Model 699B02 Handheld Shaker is a portable, battery powered 1 g vibration shaker. The 699B02 supports sensors weighing up to 250 grams and includes a protective carrying case.

  • Acceleration Output: (±3%) 1.00 g rms (9.81 m/s² rms)
  • Velocity Output: 0.39 in/sec rms (9.81 mm/s rms)
  • Operating Frequency: (±1%) 159.2 Hz (159.2 Hz)
  • Maximum Load: 8.8 oz (250 gm)
Industrial Portable Vibration Calibrator

Industrial Portable Vibration Calibrator - 699A06

Perform end-to-end checks of an entire measurement chain with the 699A06 Portable Vibration Calibrator. The 699A06 is ideal for field validations of accelerometers, velocity sensors and proximity probes. A wide operating frequency range of 5 Hz to 10 kHz, LCD readout in English or Metric units, convenient size, long battery life and rugged packaging make it a useful in situ calibration tool.

  • Calibrate from 5 Hz to 10 kHz (300 to 600 000 CPM)
  • Performs end-to-end measurement chain checks
  • Extensive 18 hour battery life
  • Maximum sensor payload of 800 grams
  • Lightweight unit is only 18 lbs
Portable Vibration Calibrator

Industrial Portable Vibration Calibrator - 699A07

Model 699A07 Portable Vibration Calibrator is an ideal tool for checking accelerometers, velocity transducers and proximity probes over a wide operating frequency and amplitude range. The unit is a compact, battery-powered, and completely self-contained vibration reference source which can be conveniently used to calibrate individual sensors, vibration switches and data collectors, as well as to validate the entire measurement channel of a condition monitoring or recording system.

  • Calibrate from 5 Hz to 10 kHz (300 to 600 000 CPM)
  • Check alarm & alert trip points in condition monitoring systems
  • Internal memory and USB flash drive output
  • Digital closed-loop control for enhanced stability and accuracy
  • Generate calibration certificates that are ISO 17025 compliant

From The Modal Shop

Low Frequency Portable Shaker Table

Low Frequency Portable Shaker Table - 9200D
(Learn more on www.modalshop.com)

The 9200D Low Frequency Portable Shaker Table is designed for verifying critical vibration instrumentation used to protect slow speed rotating equipment as low as 0.7 Hz (42 CPM). Until now, technicians were required to remove moving coil velocity sensors, low frequency accelerometers and proximity probes during an outage and send these instruments to a separate lab for calibration. Battery-powered, rugged and portable, the 9200D brings low frequency calibration to the plant floor.

  • Calibrate from 0.7 Hz to 2 kHz (42 to 120 000 CPM)
  • Long lasting 14 hour battery life
  • Rugged, lightweight design is ideal for industrial applications
  • Closed loop control reduces testing time
  • Confirms entire measurement channel: sensor, cabling, signal conditioning and data acquisition systems
Low Frequency Portable Vibration Calibrator

Low Frequency Portable Vibration Calibrator -
(Learn more on www.modalshop.com)

Reduce perceived risk in a hard insurance market using the The Modal Shop’s Model 9210D Low Frequency Portable Vibration Calibrator. The 9210D allows plant managers to put ISO 17025 compliant vibration calibration certificates in the hands of their insurance risk engineer at the end of the plant tour, making it easier to obtain business interruption insurance while promoting a safe, technologically advanced working environment.

  • Calibrate from 0.7 Hz to 2 kHz (42 to 120 000 CPM)
  • Generate ISO 17025 compliant calibration certificates
  • Verify alert and alarm settings on vibration monitoring systems protecting slow speed machinery
  • Simulate vibration in velocity, displacement or acceleration scales at actual machine running speeds
  • High payload capability allows for calibration of moving coil velocity transducers