industrial dynamic strain sensor, ground isolated, icp® quartz, 10 mv/microstrain, +/-300 microstrain range, m6 x 1 thd, rohs compliant, integral cable 10-ft

DYNAMIC STRAIN SENSOR, ISOLATED

Model RHM240M40

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • IP

Industrial dynamic strain sensor, ground isolated, ICP® quartz, 10 mV/microstrain, +/-300 microstrain range, M6 x 1 thd, RoHS compliant, integral cable 10-ft

  • Measurement Range: 300 pk µε (300 pk µε)
  • Sensitivity: (±20%)10 mV/µε (10 mV/µε)
  • Broadband Resolution: .001 nε (.001 nε)

Additional configurations:

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Based on 5 mV/µɛ sensitivity.
[2] Typical.

English: SI:
Performance
Sensitivity (±20 %) 10 mV/µε 10 mV/µε
Measurement Range 300 pk µε 300 pk µε [4]
Frequency Range (-5 %) .004 Hz .004 Hz [3]
Broadband Resolution (1) .001 nε .001 nε [2]
Non-Linearity ≤2 % ≤2 % [1]
Environmental
Temperature Range (Operating ) -65 to +250 °F -54 to +121 °C [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant ≥150 sec ≥150 sec
Electrical Isolation ≥100000000 Ohm ≥100000000 Ohm
Physical
Sensing Element Quartz Quartz
Housing Material Stainless Steel Stainless Steel
Sealing Epoxy Epoxy
Size - Width .67 in 17 mm
Size - Length 1.725 in 43.8 mm
Size - Height .60 in 15 mm
Weight (without cable) 2.0 oz 58 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Mounting Through Hole Through Hole
Mounting Torque 7.38 ft-lb 10 Nm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 0
M081A100 Mounting screw 1

Build Out Your Measurement Chain