icp® quartz force ring, 40k lb comp., 0.12 mv/lb

Force Sensor, ICP®

Model 204C

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-2 is 10 Wks.
  • CE
  • IP

ICP® quartz force ring, 40k lb comp., 0.12 mV/lb

  • Measurement Range: 40000 lb (177.92 kN)
  • Sensitivity: (±15%)0.12 mV/lb (27.0 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 55000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.12 mV/lb 27.0 mV/kN
Measurement Range (Compression) 40000 lb 177.92 kN
Maximum Static Force (Compression) 50000 lb 222.4 kN
Broadband Resolution (1) 0.80 lb-rms 3.6 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 55000 Hz 55000 Hz [4]
Non-Linearity ≤1.5 % FS ≤1.5 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.08 %/°F ≤0.14 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise (1 Hz) 0.088 lb/√Hz 0.39 N/√Hz [2]
Spectral Noise (10 Hz) 0.025 lb/√Hz 0.11 N√Hz [2]
Spectral Noise (100 Hz) 0.0060 lb/√Hz 0.0266 N/√Hz [2]
Spectral Noise (1000 Hz) 0.0016 lb/√Hz 0.00719 N/√Hz [2]
Output Polarity (Compression) Positive Positive
Physical
Preload 8000 lb 35.585 kN
Stiffness 29 lb/µin 5 kN/µm [2]
Size - Diameter 1.34 in 34 mm
Size - Height 0.47 in 12 mm
Size - Bolt Diameter 0.625 in 16 mm
Size - ID (Hole Diameter) 0.660 in 16.76 mm
Size - OD (Sensor) 1.340 in 34 mm
Size - Sensing Surface 1.10 in 28 mm
Weight 2.0 oz 57 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A14 Mounting stud, 1/2-20 x 1.400", BeCu for Models 204C & 214B 1
082B04 Anti-friction washer for Models (M)204C & (M)214B 1
083B04 Pilot bushing for Models 204C & 214B 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M083B04 Pilot Bushing 1
Supplied M081A14 Mounting Stud, M14 x 1.25 x 1.400, BeCu 1

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


410C01
Model: 410C01

ICP® sensor signal cond., 35mm DIN-rail ...

$902.00 USD

(Pricing valid only in the U.S.)

002C10
Model: 002C10

General purpose coaxial cable, white FEP...

$57.00 USD

(Pricing valid only in the U.S.)

M204C
Model: M204C

ICP® quartz force ring, 40k lb comp., 0....

$1,200.00 USD

(Pricing valid only in the U.S.)

081A14
Model: 081A14

Mounting stud, 1/2-20 x 1.400", BeCu for...

$96.00 USD

(Pricing valid only in the U.S.)

082B04
Model: 082B04

Anti-friction washer for Models (M)204C ...

$64.00 USD

(Pricing valid only in the U.S.)

083B04
Model: 083B04

Pilot bushing for Models 204C & 214B

$28.00 USD

(Pricing valid only in the U.S.)