low profile, icp® quartz force ring, 5k lb comp., 1 mv/lb, 5-44 connector

ICP® Force Sensor

Model 201B76

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-5 is 14 Dys.
Lead Time for 6-15 is 3 Wks.
Lead Time for 16-25 is 5 Wks.
Lead Time for 16-25 is 5 Wks.
  • CE
  • IP

Low profile, ICP® quartz force ring, 5k lb comp., 1 mV/lb, 5-44 connector

  • Measurement Range: 5000 lb (22.24 kN)
  • Sensitivity: (±15%)1 mV/lb (224.8 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 90000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 1 mV/lb 224.8 mV/kN
Measurement Range (Compression) 5000 lb 22.24 kN
Maximum Static Force (Compression) 5000 lb 22.24 kN
Broadband Resolution (1) 0.10 lb-rms 0.445 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 90000 Hz 90000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise (1 Hz) 0.00307 lb/√Hz 0.0137 N/√Hz [2]
Spectral Noise (10 Hz) 0.00115 lb/√Hz 0.00513 N√Hz [2]
Spectral Noise (100 Hz) 0.000402 lb/√Hz 0.00179 N/√Hz [2]
Spectral Noise (1000 Hz) 0.000114 lb/√Hz 0.000509 N/√Hz [2]
Output Polarity (Compression) Positive Positive
Physical
Preload 1000 lb 4.448 kN
Stiffness 16 lb/µin 2.8 kN/µm [2]
Weight 0.25 oz 7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 5-44 Coaxial Jack 5-44 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A11 Mounting stud, 10-32 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76 1
083A15 Pilot bushing (10-32) for Models 201B76 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A11 Mounting Stud, M5 x 0.8 x 0.730, BeCu 1
Supplied M083A15 Pilot Bushing, M5 x 0.8 1

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain