quartz, free-field, icp® blast pressure pencil probe, 50 psi, 100 mv/psi, 10-32 connector

QUARTZ ICP BLAST PRESSURE SENSOR (10-32)

Model 137B23A

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 12 Wks.
Lead Time for 6-10 is 14 Wks.
  • CE
  • IP

Quartz, free-field, ICP® blast pressure pencil probe, 50 psi, 100 mV/psi, 10-32 connector

  • Measurement Range: 50 psi (345 kPa)
  • Sensitivity: (±15%)100 mV/psi (14.5 mV/kPa)
  • Resonant Frequency: >=400 kHz
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 12.5 oz (353 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range (for ±5V output) 50 psi 345 kPa
Useful Overrange (for ± 10V output) 100 psi 690 kPa [3]
Sensitivity (±15 %) 100 mV/psi 14.5 mV/kPa
Maximum Pressure 1000 psi 6895 kPa
Resolution 0.01 psi 0.069 kPa [2]
Resonant Frequency ≥400 kHz ≥400 kHz
Rise Time (Incident) ≤6.5 µ sec ≤6.5 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Temperature Range (Operating) -100 to +275 °F -73 to +135 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.090 %/°C
Electrical
Discharge Time Constant (at room temp) ≥0.2 sec ≥0.2 sec
Excitation Voltage 22 to 30 VDC 22 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 15 VDC 8 to 15 VDC
Physical
Sensing Geometry Compression Compression
Sensing Element Quartz Quartz
Housing Material Aluminum Aluminum
Diaphragm Invar Invar
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 12.5 oz 353 gm [2]

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-1 Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. 0
085A43 Connector protector for series 137B2xA 1

Build Out Your Measurement Chain

063A02
Model: 063A02

Mounting adaptor for 137 Series Free-fie...

$350.00 USD

(Pricing valid only in the U.S.)

Add to Cart
079A15
Model: 079A15

Microphone stand (with boom attachment &...

$85.00 USD

(Pricing valid only in the U.S.)

Add to Cart
079A17
Model: 079A17

Tripod microphone stand

$75.00 USD

(Pricing valid only in the U.S.)

Add to Cart
079A18
Model: 079A18

Flexible arm with 2" clamp at base and 1...

$152.00 USD

(Pricing valid only in the U.S.)

Add to Cart